International Harvester 3088 tractor

International Harvester 3088

Power

88 hp[P] hp

Production

1981-1985

Engine

6-cylinder

Transmission

Partial power shift

Weight

11940 lbs*With cab. [5415 kg]

Drive

2WD/4WD

From the same series:

3288

Introduction

Production Information of International Harvester, 3088

The production information of the tractor (3088) includes details about its manufacturing.

Original price was $28,900 in 1985
Row-Crop tractor
Built in Rock Island, Illinois, USA
ManufacturerInternational Harvester
Total built1,065

Dimension and Tires Information of International Harvester, 3088

This section sums up the dimension and tires information of the tractor.

Rear tread60 to 127.5 inches [152 to 323 cm]
Wheelbase105 inches [266 cm]
Shipping weight10600 lbs [4808 kg]
Height (cab)112 inches [284 cm]
Length184 inches [467 cm]
Rear axle3.25 by 104 inches [82 by 2641 mm]
Operating weight11940 lbs*With cab. [5415 kg]
Width102 inches*Width at minimum tread. [259 cm]
Front tread60 to 84 inches [152 to 213 cm]
Rear axle3.25 by 118 inches [82 by 2997 mm]
Ground clearance13 inches [33 cm]
Ag front9.5L-15
Ag rear18.4-34

Engine Specifications of International Harvester, 3088

Get the specifications for the engine and if different options are available.

Liquid-cooled
6-cylinder
Starter volts12
Displacement358 ci [5.9 L]
Oil capacity11 qts [10.4 L]
Compression16.4:1
Bore/Stroke3.875x5.0625 inches [98 x 129 mm]
Coolant capacity24 qts [22.7 L]
Idle RPM900-2400
Rated RPM2400
Air cleanerDual dry element

Transmission Information of International Harvester, 3088Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an eletcric solenoid actuated Torque Amplifier.
TypePartial power shift
Oil capacity90 qts [85.2 L]
Gears16 forward and 8 reverse
ClutchCerametallic disc

Mechanical Specs of International Harvester, 3088Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Four-post ROPS standard. Available with cab or as open-station tractor.
Power steering
Hydraulic wet disc brakes

Power Information of International Harvester, 3088Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
1000@2100
Rear PTO Type540/1000
Engine RPM540@2100

Hydraulics Specifications of International Harvester, 3088

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Total flow27 gpm [102.2 lpm]
Pump flow15 gpm [56.8 lpm]
Capacity22.5 gal [85.2 L]
Steering flow12 gpm [45.4 lpm]
Valves2 or 3

Three-Point Hitch of International Harvester, 3088

Hitch category and rear/front lift capacity.

Rear TypeII
ControlDraft sensing

Electrical System of International Harvester, 3088

Battery voltage, charging system and ground.

GroundNegative
Battery volts12

Frequently asked questions

How much horsepower does the International Harvester 3088 have?

The International Harvester 3088 delivers 88 hp[P] HP.

What years was the International Harvester 3088 produced?

The International Harvester 3088 was produced in 1981-1985.

What engine does the International Harvester 3088 have?

The International Harvester 3088 is powered by a 6-cylinder engine.

What transmission does the International Harvester 3088 use?

The International Harvester 3088 uses a Partial power shift transmission.

How much does the International Harvester 3088 weigh?

The International Harvester 3088 weighs 11940 lbs*With cab. [5415 kg].

Is the International Harvester 3088 4WD?

The International Harvester 3088 is available in 2WD/4WD.

Compare the International Harvester 3088 with another model