Introduction
Production Information of International Harvester, 786
The production information of the tractor (786) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | International Harvester |
|---|---|
| Total built | 1,844 |
Dimension and Tires Information of International Harvester, 786
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 13 inches [33 cm] |
|---|---|
| Wheelbase | 101 inches [256 cm] |
| Shipping weight | 10,600 lbs [4808 kg] |
| Height (ROPS) | 112 inches [284 cm] |
| Length | 165 inches [419 cm] |
| Operating weight | 11,590 lbs [5257 kg] |
| Width | 102 inches [259 cm] |
| Ag front | 9.5L-15 |
|---|---|
| Ag rear | 18.4-34 |
Engine Specifications of International Harvester, 786
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder |
| Air cleaner | Dual dry element |
|---|---|
| Displacement | 358 ci [5.9 L] |
| Oil capacity | 12 qts [11.4 L] |
| Rated RPM | 2400 |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Coolant capacity | 24 qts [22.7 L] |
Transmission Information of International Harvester, 786Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The tractor must be stopped to shift the transmission (except the TA). The right-most console lever selects range (high, low, or reverse) and the left lever selects one of four gears. The Torque Amplifier (TA) is on the left side of the instrument panel and may be shifted without the clutch. Pulling back engages the TA, reducing the ground speed. Pushing the lever forward puts the transmission in direct drive (DD) mode. |
| Transmission | Torque Amplifier |
|---|---|
| Oil type | IH Hy-Tran/B-6 |
| Oil capacity | 90 qts [85.2 L] |
| Type | Two-speed power shift |
| IH Hy-Tran/B-6 | |
| Gears | 16 forward and 8 reverse |
Mechanical Specs of International Harvester, 786Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. Cab optional. |
| Hydraulic disc brakes |
| Final drives | Bull gear |
|---|---|
| Steering | Power assist |
Power Information of International Harvester, 786Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of International Harvester, 786
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 22.5 gal [85.2 L] |
Three-Point Hitch of International Harvester, 786
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|
Electrical System of International Harvester, 786
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 61 (with cab) | |
| Charging system | Alternator |
| Battery CCA | 470 |
| Charging amps | 42 |
Frequently asked questions
How much horsepower does the International Harvester 786 have?
The International Harvester 786 delivers 89 hp[P] HP.
What years was the International Harvester 786 produced?
The International Harvester 786 was produced in 1980-1981.
What engine does the International Harvester 786 have?
The International Harvester 786 is powered by a 6-cylinder engine.
What transmission does the International Harvester 786 use?
The International Harvester 786 uses a Torque Amplifier transmission.
How much does the International Harvester 786 weigh?
The International Harvester 786 weighs 11,590 lbs [5257 kg].
Is the International Harvester 786 4WD?
The International Harvester 786 is available in 2WD.
