Introduction
Production Information of International Harvester, 886
The production information of the tractor (886) includes details about its manufacturing.
| Original price was $27,500 in 1981 |
| Row-Crop tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | International Harvester |
|---|---|
| Total built | 9,578 |
Dimension and Tires Information of International Harvester, 886
This section sums up the dimension and tires information of the tractor.
| Height (cab) | 112 inches [284 cm] |
|---|---|
| Wheelbase | 105 inches (wide-tread front) [266 cm] |
| 163 inches (4WD) [414 cm] | |
| Length | 165 inches [419 cm] |
| 101 inches (tricycle front) [256 cm] | |
| Shipping weight | 11,000 lbs [4989 kg] |
| Width | 102 inches [259 cm] |
| 99 inches (4WD) [251 cm] | |
| Ground clearance | 13 inches [33 cm] |
| Ag front | 10.00-16 |
|---|---|
| Ag rear | 18.4-38 |
Engine Specifications of International Harvester, 886
Get the specifications for the engine and if different options are available.
| The IH 886 tractor switched to the D-358 engine in 1979, serial number 14472. |
| Liquid-cooled |
| 6-cylinder |
| Coolant capacity | 24 qts [22.7 L] |
|---|---|
| Oil capacity | 12 qts [11.4 L] |
| Air cleaner | Dual dry element |
| Displacement | 358 ci [5.9 L] |
| Rated RPM | 2400 |
| Compression | 14.8:1 |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
Transmission Information of International Harvester, 886Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The transmission features three ranges (low, high, and reverse) with four gears (1-4) in each range. The Torque Amplifier (TA) provides an additional high/low selection for each speed. The range and gear can be shifted only when the tractor is stopped. The TA can be shifted while the tractor is in motion. |
| Transmission | Torque Amplifier |
|---|---|
| Oil type | IH Hy-Tran/B-6 |
| Oil capacity | 90 qts [85.2 L] |
| Type | Two-speed power shift |
| IH Hy-Tran/B-6 | |
| Gears | 16 forward and 8 reverse |
Mechanical Specs of International Harvester, 886Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard with air-conditioning. Open operator station and four-post ROPS available. |
| Hydraulic wet disc brakes |
| Final drives | Bull gear |
|---|---|
| Steering | Power assist |
Power Information of International Harvester, 886Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of International Harvester, 886
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 22.5 gal [85.2 L] |
Three-Point Hitch of International Harvester, 886
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|
Electrical System of International Harvester, 886
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 61 (with cab) | |
| Charging system | Alternator |
| Battery CCA | 470 |
| Charging amps | 42 |
Frequently asked questions
How much horsepower does the International Harvester 886 have?
The International Harvester 886 delivers 94 hp[P] HP.
What years was the International Harvester 886 produced?
The International Harvester 886 was produced in 1976-1981.
What engine does the International Harvester 886 have?
The International Harvester 886 is powered by a 6-cylinder engine.
What transmission does the International Harvester 886 use?
The International Harvester 886 uses a Torque Amplifier transmission.
How much does the International Harvester 886 weigh?
The International Harvester 886 weighs 11,000 lbs [4989 kg].
Is the International Harvester 886 4WD?
The International Harvester 886 is available in 2WD/4WD.