Introduction
Production Information of International Harvester, 956
The production information of the tractor (956) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 956
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 64 to 75 inches [162 to 190 cm] |
|---|---|
| 2WD Wheelbase | 103.4 inches [262 cm] |
| Width | 91 inches [231 cm] |
| 4WD Length | 166.5 inches [422 cm] |
| 4WD Wheelbase | 101.9 inches [258 cm] |
| 4WD Cab Weight | 10538 lbs [4780 kg] |
| Height (cab) | 108 inches [274 cm] |
| 2WD Length | 165 inches [419 cm] |
| Rear tread | 67 to 87 inches [170 to 220 cm] |
| 2WD Front tread | 59 to 71 inches [149 to 180 cm] |
| 4WD Clearance (front axle) | 15 inches [38 cm] |
| 2WD Cab Weight | 9458 lbs [4290 kg] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9R38 |
|---|---|
| 4WD Standard tires (ag) | Front: 12.4R28. Rear: 16.9R38 |
Engine Specifications of International Harvester, 956
Get the specifications for the engine and if different options are available.
| International Harvester D-358 |
| Liquid-cooled |
| Diesel |
| 6-cylinder |
| Coolant capacity | 25.4 qts [24.0 L] |
|---|---|
| Fuel system | Direct injection |
| Air cleaner | Dry |
| Torque | 250 lb-ft [339.0 Nm] |
| Rated RPM | 2200 |
| Displacement | 358 ci [5.9 L] |
| Power (net) | 95 hp [70.8 kW] |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Oil capacity | 12.7 qts [12.0 L] |
| Starter volts | 12 |
| Torque RPM | 1400 |
Transmission Information of International Harvester, 956Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Two-speed power shift |
|---|---|
| Gears | 16 forward and 8 reverse |
| Clutch | 310mm cerametallic disc |
Mechanical Specs of International Harvester, 956Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Standard cab and deluxe XL cab optional. |
| Power steering |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of International Harvester, 956Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2000 | |
| Engine RPM | 540@1920 |
| Clutch | 310mm dry disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of International Harvester, 956
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 11.1 gpm [42.0 lpm] |
| Capacity | 12.2 gal [46.2 L] |
| Pressure | 2346 psi [161.8 bar] |
Three-Point Hitch of International Harvester, 956
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| 11023 lbsOptOptional [5000 kg] | |
| Control | Position and draft control |
| Rear lift (at ends) | 9171 lbs [4159 kg] |
Electrical System of International Harvester, 956
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 110 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the International Harvester 956 have?
The International Harvester 956 delivers 95 HP.
What years was the International Harvester 956 produced?
The International Harvester 956 was produced in 1982-1985.
What engine does the International Harvester 956 have?
The International Harvester 956 is powered by a Diesel, 6-cylinder engine.
What transmission does the International Harvester 956 use?
The International Harvester 956 uses a Two-speed power shift transmission.
How much does the International Harvester 956 weigh?
The International Harvester 956 weighs 10538 lbs [4780 kg].
Is the International Harvester 956 4WD?
The International Harvester 956 is available in 2WD/4WD.