Introduction
Production Information of International Harvester, 475
The production information of the tractor (475) includes details about its manufacturing.
| Utility tractor |
| Built in Doncaster, England |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 475
This section sums up the dimension and tires information of the tractor.
| Front tread | 52 to 80 inches [132 to 203 cm] |
|---|---|
| Wheelbase | 84.5 inches [214 cm] |
| Height (cab) | 90 inches [228 cm] |
| Height (steering wheel) | 59.5 inches [151 cm] |
| Length | 128 inches [325 cm] |
| Rear tread | 52 to 76 inches [132 to 193 cm] |
| Weight | 5733 lbs [2600 kg] |
| Width | 64 inches [162 cm] |
| 12.4/11-32 | |
| Ag front | 6.00-16 |
| 14.9/13-30 | |
| Ag rear | 14.9/13-28 |
| Ag rear | 12.4/11-36 |
| 13.6/12-36 | |
| 16.9/14-30 | |
| Ag front | 7.50-16 |
Engine Specifications of International Harvester, 475
Get the specifications for the engine and if different options are available.
| Perkins A4.212 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Power | 60 hp [44.7 kW] |
|---|---|
| Displacement | 212 ci [3.5 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 3.875x4.50 inches [98 x 114 mm] |
| Starter volts | 12 |
Transmission Information of International Harvester, 475Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears (1-4) in low, high, and reverse ranges. |
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Transmission | Torque Amplifier |
|---|---|
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
| 8-speed partially synchronized |
| 16-speed two-speed power shift |
Mechanical Specs of International Harvester, 475Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Wet disc brakes |
| Power steering |
| Open operator station. Four-post ROPS and cab available. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of International Harvester, 475Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of International Harvester, 475
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 11.9 gpm [45.0 lpm] |
|---|
Three-Point Hitch of International Harvester, 475
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift | 3969 lbs [1800 kg] |
Electrical System of International Harvester, 475
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 95 |
| Charging amps | 28 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 475 have?
The International Harvester 475 delivers 60 HP.
What years was the International Harvester 475 produced?
The International Harvester 475 was produced in 1974-1977.
What engine does the International Harvester 475 have?
The International Harvester 475 is powered by a Diesel, 4-cylinder engine.
What transmission does the International Harvester 475 use?
The International Harvester 475 uses a Partially synchronized transmission.
How much does the International Harvester 475 weigh?
The International Harvester 475 weighs 5733 lbs [2600 kg].
Is the International Harvester 475 4WD?
The International Harvester 475 is available in 2WD.