Introduction
Production Information of International Harvester, 483
The production information of the tractor (483) includes details about its manufacturing.
| Original price was $13,900 in 1984 |
| Built in Japan |
| Utility tractor |
| Distributor | International Harvester |
|---|---|
| Manufacturer | Komatsu |
Dimension and Tires Information of International Harvester, 483
This section sums up the dimension and tires information of the tractor.
| Rear tread | 47.6 to 76.1 inches [120 to 193 cm] |
|---|---|
| Wheelbase | 76.8 inches [195 cm] |
| Height (exhaust) | 87.8 inches [223 cm] |
| Height (steering wheel) | 61.4 inches [155 cm] |
| Length | 118.3 inches [300 cm] |
| 2WD Ground clearance | 15.4 inches [39 cm] |
| 2WD Shipping weight | 3550 lbs [1610 kg] |
| Width | 65.2 inches [165 cm] |
| Front tread | 48 to 75.7 inches [121 to 192 cm] |
| 4WD Ground clearance | 15.9 inches [40 cm] |
| 4WD Shipping weight | 3991 lbs [1810 kg] |
| 2WD Standard tires (ag) | Front: 6.00-16. Rear: 13.6/12-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8.3-20. Rear: 13.6/12-28 |
Engine Specifications of International Harvester, 483
Get the specifications for the engine and if different options are available.
| Nissan SD25 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 6 qts [5.7 L] |
|---|---|
| Displacement | 151.8 ci [2.5 L] |
| Rated RPM | 2400 |
| Bore/Stroke | 3.50x3.94 inches [89 x 100 mm] |
| Coolant capacity | 8.4 qts [7.9 L] |
| Starter volts | 12 |
| Torque | 104.3 lb-ft [141.4 Nm] |
| Power | 46 hp [34.3 kW] |
Transmission Information of International Harvester, 483Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Gears | 8 forward and 2 reverse |
|---|---|
| Oil capacity | 34 qts [32.2 L] |
Mechanical Specs of International Harvester, 483Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| ROPS and canopy optional |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of International Harvester, 483Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of International Harvester, 483
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 8.5 gal [32.2 L] |
|---|---|
| Pressure | 2500 psi [172.4 bar] |
| Total flow | 6.4 gpm [24.2 lpm] |
Three-Point Hitch of International Harvester, 483
Hitch category and rear/front lift capacity.
| Rear Type | I/II |
|---|---|
| Rear lift (at ends) | 3307 lbs [1500 kg] |
Electrical System of International Harvester, 483
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 35 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 483 have?
The International Harvester 483 delivers 46 HP.
What years was the International Harvester 483 produced?
The International Harvester 483 was produced in 1982-1984.
What engine does the International Harvester 483 have?
The International Harvester 483 is powered by a Diesel, 4-cylinder engine.
How much does the International Harvester 483 weigh?
The International Harvester 483 weighs 3550 lbs [1610 kg].
Is the International Harvester 483 4WD?
The International Harvester 483 is available in 2WD/4WD.