Introduction
Production Information of International Harvester, 484
The production information of the tractor (484) includes details about its manufacturing.
| Original price was $11,800 in 1984 |
| Utility tractor |
| Built in Doncaster, England |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 484
This section sums up the dimension and tires information of the tractor.
| Utility Ground clearance | 15.75 inches [40 cm] |
|---|---|
| Utility Wheelbase | 79 inches [200 cm] |
| Utility Width | 70.4 inches [178 cm] |
| Low-profile Length | 138.3 inches [351 cm] |
| Low-profile Wheelbase | 78.25 inches [198 cm] |
| Low-profile Height (steering wheel) | 56.5 inches [143 cm] |
| Low-profile Width | 78.5 inches [199 cm] |
| Utility Length | 133.7 inches [339 cm] |
| Low-profile Ground clearance | 10.7 inches [27 cm] |
| Low-profile Shipping weight | 5140 lbs [2331 kg] |
| Utility Shipping weight | 5200 lbs [2358 kg] |
| Utility Height (steering wheel) | 61 inches [154 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 13.6-28 |
Engine Specifications of International Harvester, 484
Get the specifications for the engine and if different options are available.
| International Harvester D-179 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Air cleaner | Dry |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Coolant capacity | 12 qts [11.4 L] |
| Oil capacity | 6.8 qts [6.4 L] |
| Idle RPM | 700-2400 |
| Rated RPM | 2200 |
| Power | 50 hp [37.3 kW] |
Transmission Information of International Harvester, 484Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in high, low, and reverse ranges. |
| Type | Syncromesh |
|---|---|
| Oil capacity | 36 qts [34.1 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of International Harvester, 484Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Two-post fixed ROPS. Canopy optional. |
| Power steering |
| Independent hydraulic wet disc brakes |
Power Information of International Harvester, 484Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of International Harvester, 484
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 15.4 gpm [58.3 lpm] |
| Capacity | 9 gal [34.1 L] |
| Valves | 0 to 2 |
Three-Point Hitch of International Harvester, 484
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 3100 lbs [1406 kg] |
Electrical System of International Harvester, 484
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 484 have?
The International Harvester 484 delivers 50 HP.
What years was the International Harvester 484 produced?
The International Harvester 484 was produced in 1977-1982.
What engine does the International Harvester 484 have?
The International Harvester 484 is powered by a Diesel, 3-cylinder engine.
What transmission does the International Harvester 484 use?
The International Harvester 484 uses a Syncromesh transmission.
How much does the International Harvester 484 weigh?
The International Harvester 484 weighs 5140 lbs [2331 kg].
Is the International Harvester 484 4WD?
The International Harvester 484 is available in 2WD.