Introduction
Production Information of International Harvester, 464
The production information of the tractor (464) includes details about its manufacturing.
| Original price was $8,500 in 1978 |
| Utility tractor |
| Built in Louisville, Kentucky, USA |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 464
This section sums up the dimension and tires information of the tractor.
| Rear tread | 52 to 76 inches [132 to 193 cm] |
|---|---|
| Wheelbase | 75.2 inches [191 cm] |
| Ground clearance | 10 inches [25 cm] |
| Height (steering wheel) | 55 inches [139 cm] |
| Length | 133 inches (with 3-point) [337 cm] |
| Front tread | 48 to 80 inches [121 to 203 cm] |
| Width | 66 inches (min) [167 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 13.6-28 |
Engine Specifications of International Harvester, 464
Get the specifications for the engine and if different options are available.
| Interntional Harvester D-179 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Oil capacity | 8 qts [7.6 L] |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Compression | 16:1 |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Coolant capacity | 12 qts [11.4 L] |
| Starter volts | 12 |
| Rated RPM | 2400 |
| Air cleaner | Dry |
Transmission Information of International Harvester, 464Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (low/high) plus reverse. |
| Type | Synchromesh |
|---|---|
| Oil capacity | 36 qts [34.1 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of International Harvester, 464Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. ROPS available. |
| Independent hydraulic wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear OptOptional |
|---|
Power Information of International Harvester, 464Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2200 |
Hydraulics Specifications of International Harvester, 464
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 12 gpm [45.4 lpm] |
|---|
Three-Point Hitch of International Harvester, 464
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
Frequently asked questions
How much horsepower does the International Harvester 464 have?
The International Harvester 464 delivers 50 hp[P] HP.
What years was the International Harvester 464 produced?
The International Harvester 464 was produced in 1973-1978.
What engine does the International Harvester 464 have?
The International Harvester 464 is powered by a Diesel, 3-cylinder engine.
What transmission does the International Harvester 464 use?
The International Harvester 464 uses a Synchromesh transmission.
Is the International Harvester 464 4WD?
The International Harvester 464 is available in 2WD.