International Harvester 574 tractor

International Harvester 574

Power

67 hp

Production

1970-1978

Engine

Diesel, 4-cylinder

Transmission

Partially synchronized

Drive

2WD

From the same series:

464
674

Introduction

Production Information of International Harvester, 574

The production information of the tractor (574) includes details about its manufacturing.

Original price was $10,000 in 1978
Utility tractor
The International 574 is similar to the 2500 backhoe/industrial tractor.
ManufacturerInternational Harvester
Louisville, Kentucky, USA
FactoriesDoncaster, England

Dimension and Tires Information of International Harvester, 574

This section sums up the dimension and tires information of the tractor.

Front tread48 to 80 inches [121 to 203 cm]
Wheelbase84.5 inches [214 cm]
Height (ROPS)89 inches [226 cm]
Height (steering wheel)59.5 inches [151 cm]
Length134 inches [340 cm]
Rear tread52 to 76 inches [132 to 193 cm]
Ground clearance14.5 inches [36 cm]
Width64 inches [162 cm]
11-32
Ag front6.00-16
Ag rear13-30
7.50-16
Ag rear11-36
12-38
14-30
Ag front5.50-16

Engine Specifications of International Harvester, 574

Get the specifications for the engine and if different options are available.

International Harvester D239
Liquid-cooled
Diesel
4-cylinder
Starter volts12
Torque RPM1600
Power (gross)68 hp [50.7 kW]
Oil capacity9 qts [8.5 L]
Air cleanerTwo stage dry
Compression12:1
Fuel systemDirect injection
Displacement238.6 ci [3.9 L]
Power (net)64.7 hp [48.2 kW]
Bore/Stroke3.875x5.06 inches [98 x 129 mm]
Torque185 lb-ft [250.9 Nm]
Coolant capacity14.5 qts [13.7 L]
2400 (hydro)
Rated RPM2200 (gear)

Transmission Information of International Harvester, 574Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four synchronized gears (1-4) in low, high, and reverse ranges.
TypePartially synchronized
Gears8 forward and 4 reverse
Clutch280mm dry disc

Transmission variants 2

The hydrostatic model 574 was uncommon in North America, most were sold in the European market.
TypeHydrostatic
GearsInfinite forward and reverse

Transmission variants 3

TransmissionTorque Amplifier
TypeTwo-speed power shift.
Gears16 forward and 8 reverse
8-speed partially synchronized
Hydrostatic
16-speed two-speed power shift.

Mechanical Specs of International Harvester, 574Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Open operator station. Four-post ROPS and cab available.
Power steering
Hydraulic wet disc brakes

Power Information of International Harvester, 574Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Engine RPM540@1935
540/1000 (1.375)OptOptional
ClutchHydraulic wet disc
1000@2200
Rear PTO Type540 (1.375)

Hydraulics Specifications of International Harvester, 574

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pressure2500 psi [172.4 bar]
Pump flow11.9 gpm [45.0 lpm]

Three-Point Hitch of International Harvester, 574

Hitch category and rear/front lift capacity.

Rear TypeII
ControlPosition and draft control
Rear lift (at ends)3600 lbs [1632 kg]

Electrical System of International Harvester, 574

Battery voltage, charging system and ground.

Charging systemAlternator
Charging amps28
Battery volts12

Frequently asked questions

How much horsepower does the International Harvester 574 have?

The International Harvester 574 delivers 67 HP.

What years was the International Harvester 574 produced?

The International Harvester 574 was produced in 1970-1978.

What engine does the International Harvester 574 have?

The International Harvester 574 is powered by a Diesel, 4-cylinder engine.

What transmission does the International Harvester 574 use?

The International Harvester 574 uses a Partially synchronized transmission.

Is the International Harvester 574 4WD?

The International Harvester 574 is available in 2WD.

Compare the International Harvester 574 with another model