Introduction
Production Information of International Harvester, 833
The production information of the tractor (833) includes details about its manufacturing.
| Utility tractor |
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 833
This section sums up the dimension and tires information of the tractor.
| Front tread | 54.1 to 63.9 inches [137 to 162 cm] |
|---|---|
| Wheelbase | 84.65 inches [215 cm] |
| Weight | 6426 lbs [2914 kg] |
| Height (cab) | 97.6 inches [247 cm] |
| Length | 140.6 inches [357 cm] |
| Rear tread | 50.2 to 76 inches [127 to 193 cm] |
| Ground clearance | 11.9 inches [30 cm] |
| Width | 77.6 inches [197 cm] |
| Standard tires (ag) | Front: 10.5-18. Rear: 14.9R30 |
|---|
Engine Specifications of International Harvester, 833
Get the specifications for the engine and if different options are available.
| International Harvester D-239 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1500 |
|---|---|
| Displacement | 238.65 ci [3.9 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Oil capacity | 9.5 qts [9.0 L] |
| Starter volts | 12 |
| Torque | 173.3 lb-ft [235.0 Nm] |
| Rated RPM | 2300 |
| Power | 67 hp [50.0 kW] |
Transmission Information of International Harvester, 833Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges, plus reverse range. |
| Gears | 8 forward and 4 reverse |
|---|---|
| Oil capacity | 36.5 qts [34.5 L] |
Transmission variants 2
| Transmission | Synchron |
|---|---|
| Gears | 16 forward and 8 reverse |
Transmission variants 3
| Type | Creeper |
|---|---|
| Gears | 16 forward and 8 reverse |
| 8-speed |
| 16-speed |
| 16-speed creeper |
Mechanical Specs of International Harvester, 833Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
Power Information of International Harvester, 833Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| 540/1000 |
Hydraulics Specifications of International Harvester, 833
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 3.2 gal [12.1 L] |
|---|---|
| Pressure | 2538 psi [175.0 bar] |
| Pump flow | 15.85 gpm [60.0 lpm] |
Three-Point Hitch of International Harvester, 833
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position control and upper-link draft sensing |
| Rear lift | 4851 lbs [2200 kg] |
Electrical System of International Harvester, 833
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 33 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the International Harvester 833 have?
The International Harvester 833 delivers 67 HP.
What years was the International Harvester 833 produced?
The International Harvester 833 was produced in 1981-1990.
What engine does the International Harvester 833 have?
The International Harvester 833 is powered by a Diesel, 4-cylinder engine.
How much does the International Harvester 833 weigh?
The International Harvester 833 weighs 6426 lbs [2914 kg].
Is the International Harvester 833 4WD?
The International Harvester 833 is available in 4WD.