Introduction
Production Information of International Harvester, 724
The production information of the tractor (724) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | International Harvester |
|---|---|
| Saint Dizier, France | |
| Factories | Neuss, Germany |
Dimension and Tires Information of International Harvester, 724
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 16.2 inches [41 cm] |
|---|---|
| Wheelbase | 83.5 inches [212 cm] |
| 2WD Weight | 6262 lbs [2840 kg] |
| Height | 61.7 inches [156 cm] |
| Length | 125.3 inches [318 cm] |
| Front tread | 52 to 67.75 inches [132 to 172 cm] |
| 4WD Weight | 6626 lbs [3005 kg] |
| Width | 71.5 inches [181 cm] |
| Rear tread | 57.5 to 73.5 inches [146 to 186 cm] |
| Ag front | 6.00-16 |
|---|---|
| 12-36 | |
| 11-38 | |
| 7.50-16 | |
| 13-30 | |
| 12-38 | |
| Ag front | 5.50-16 |
| 14-34 | |
| 14-30 | |
| 7.50-18 | |
| 14-28 | |
| Ag rear | 14-34 |
| 11-36 | |
| Ag rear | 13-28 |
| 15-30 | |
| 15.5-38 | |
| 11-32 | |
| 9-36 |
Engine Specifications of International Harvester, 724
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Intake valve clearance | 0.010 inches [0.254 mm] |
|---|---|
| Starter volts | 12 |
| Fuel system | Direct injection |
| Exhaust valve clearance | 0.012 inches [0.305 mm] |
| Rated RPM | 2200 |
| Idle RPM | 650-2420 |
| Compression | 16:1 |
| Displacement | 238.65 ci [3.9 L] |
| Power | 67 hp [50.0 kW] |
| Oil capacity | 8.4 qts [7.9 L] |
| Oil change | 200 h |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Firing order | 1-3-4-2 |
| Torque RPM | 1600 |
| Torque | 165 lb-ft [223.7 Nm] |
Transmission Information of International Harvester, 724Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in high, low, and reverse ranges. Gear shifting is synchronized using the clutch. Tractor must be stopped to shift range. |
| Transmission | Partially synchronized |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| The Agriomatic S provides an additional four forward speeds selected by a right-hand power shift lever. Pushing the lever forward engages the Agriomatic range, while rearward uses the conventional range. The Agriomatic speeds are between high and low ranges, so this provides an undershift in high range and an overshift in low range. In reverse range it operates as a power shuttle. |
| Transmission | Agriomatic S |
|---|---|
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
| 8-speed |
| 12-speed partial power shift |
Mechanical Specs of International Harvester, 724Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Manual steering |
| Open operator station. |
| Dry disc brakes |
| Hydraulic OptOptional | |
| Trailer brakes | Pneumatic OptOptional |
Power Information of International Harvester, 724Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of International Harvester, 724
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 7.5 gpm [28.4 lpm] |
|---|
Three-Point Hitch of International Harvester, 724
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 4520 lbs [2050 kg] |
Electrical System of International Harvester, 724
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 6 |
| Charging system | Generator |
| Batteries | 2 |
Frequently asked questions
How much horsepower does the International Harvester 724 have?
The International Harvester 724 delivers 67 HP.
What years was the International Harvester 724 produced?
The International Harvester 724 was produced in 1969-1974.
What transmission does the International Harvester 724 use?
The International Harvester 724 uses a Partially synchronized transmission.
How much does the International Harvester 724 weigh?
The International Harvester 724 weighs 6262 lbs [2840 kg].
Is the International Harvester 724 4WD?
The International Harvester 724 is available in 2WD/4WD.