Introduction
Production Information of International Harvester, 824
The production information of the tractor (824) includes details about its manufacturing.
| Utility tractor |
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 824
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 15.2 inches [38 cm] |
|---|---|
| Wheelbase | 83.5 inches [212 cm] |
| 2WD Weight | 6934 lbs [3145 kg] |
| Height | 71.5 inches [181 cm] |
| Length | 139.8 inches [355 cm] |
| Front tread | 52 to 67.75 inches [132 to 172 cm] |
| 4WD Weight | 7596 lbs [3445 kg] |
| Width | 78.2 inches [198 cm] |
| Rear tread | 57.5 to 73.5 inches [146 to 186 cm] |
| 2WD Standard tires (ag) | Front: 7.50-18. Rear: 13.6-38 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2-24. Rear: 16.9-34 |
Engine Specifications of International Harvester, 824
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Compression | 16:1 |
|---|---|
| Oil change | 200 h |
| Torque RPM | 1500 |
| Oil capacity | 9.6 qts [9.1 L] |
| Displacement | 238.65 ci [3.9 L] |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Power | 75 hp [55.9 kW] |
| Torque | 190.2 lb-ft [257.9 Nm] |
| Rated RPM | 2300 |
| Starter power | 4 hp [3.0 kW] |
| Starter volts | 12 |
| Firing order | 1-3-4-2 |
Transmission Information of International Harvester, 824Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in high, low, and reverse ranges. Gear shifting is synchronized using the clutch. Tractor must be stoppped to shift range. |
| Transmission | Partially synchronized |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| The Agriomatic S provides an additional four forward speeds selected by a right-hand power shift lever. Pushing the lever forward engages the Agriomatic range, while rearward uses the conventional range. The Agriomatic speeds are between high and low ranges, so this provides an undershift in high range and an overshift in low range. In reverse range it operates as a power shuttle. |
| Transmission | Agriomatic S |
|---|---|
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
| 8-speed |
| 12-speed partial power shift |
Mechanical Specs of International Harvester, 824Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Cab optional. |
| Power steering |
| Dry disc brakes |
Power Information of International Harvester, 824Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of International Harvester, 824
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 7.5 gpm [28.4 lpm] |
|---|
Three-Point Hitch of International Harvester, 824
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 5953 lbs [2700 kg] |
Electrical System of International Harvester, 824
Battery voltage, charging system and ground.
| 12 | |
| Charging system | Bosch generator |
| 1 (12V) | |
| Batteries | 2 (6V) |
| Charging amps | 11 |
| Battery volts | 6 |
| 16 |
Frequently asked questions
How much horsepower does the International Harvester 824 have?
The International Harvester 824 delivers 75 HP.
What years was the International Harvester 824 produced?
The International Harvester 824 was produced in 1971-1974.
What transmission does the International Harvester 824 use?
The International Harvester 824 uses a Partially synchronized transmission.
How much does the International Harvester 824 weigh?
The International Harvester 824 weighs 6934 lbs [3145 kg].
Is the International Harvester 824 4WD?
The International Harvester 824 is available in 2WD/4WD.