Introduction
Production Information of International Harvester, B-275
The production information of the tractor (B-275) includes details about its manufacturing.
| Utility tractor |
| Built in Bradford, England |
| Manufacturer | International Harvester |
|---|---|
| Original price | $2,800 (1961) |
| Total built | 52,432 |
Dimension and Tires Information of International Harvester, B-275
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 18.5 inches [46 cm] |
|---|---|
| Wheelbase | 74.1 inches [188 cm] |
| Height (steering wheel) | 60 inches [152 cm] |
| 89 inches (max) [226 cm] | |
| Length | 112 inches [284 cm] |
| Ground clearance | 16 inches (frame) [40 cm] |
| Width | 64 inches (min) [162 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 11-28 |
| Ag rear | 12-28 |
Engine Specifications of International Harvester, B-275
Get the specifications for the engine and if different options are available.
| International Harvester BC-144 |
| Liquid-cooled |
| Gasoline |
| 4-cylinder |
| Coolant capacity | 10.8 qts [10.2 L] |
|---|---|
| Air cleaner | Oil bath |
| Compression | 6.3:1 |
| Torque | 115 lb-ft [155.9 Nm] |
| Rated RPM | 2000 |
| Displacement | 143.1 ci [2.3 L] |
| Power | 35 hp [26.1 kW] |
| Bore/Stroke | 3.375x4.00 inches [86 x 102 mm] |
| Oil capacity | 6.3 qts [6.0 L] |
| Starter volts | 12 |
| Torque RPM | 1300 |
Transmission Information of International Harvester, B-275Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears plus reverse with high and low ranges. |
| Transmission | Sliding gear |
|---|---|
| Gears | 8 forward and 2 reverse |
| Oil capacity | 20 qts [18.9 L] |
Mechanical Specs of International Harvester, B-275Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
Power Information of International Harvester, B-275Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of International Harvester, B-275
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 3 gal [11.4 L] |
|---|---|
| Pressure | 2050 psi [141.3 bar] |
| Total flow | 6.5 gpm [24.6 lpm] |
Three-Point Hitch of International Harvester, B-275
Hitch category and rear/front lift capacity.
| Rear Type | 1/2 |
|---|
Frequently asked questions
How much horsepower does the International Harvester B-275 have?
The International Harvester B-275 delivers 38 HP.
What years was the International Harvester B-275 produced?
The International Harvester B-275 was produced in 1958-1968.
What engine does the International Harvester B-275 have?
The International Harvester B-275 is powered by a Gasoline, 4-cylinder engine.
What transmission does the International Harvester B-275 use?
The International Harvester B-275 uses a Sliding gear transmission.
Is the International Harvester B-275 4WD?
The International Harvester B-275 is available in 2WD.