International Harvester Type A 15HP
Power
16 hp[B] hp
Production
1908-1911
Engine
Gasoline, 1-cylinder
Transmission
Gear
Weight
9900 lbs [4490 kg]
Drive
2WD
From the same series:
Introduction
International Harvester Type A 15HP: A Vintage Standard-Tread Tractor
The International Harvester Type A 15HP is a historical tractor model produced between 1908 and 1911 in Upper Sandusky, Ohio, USA. As a standard-tread tractor from the early 20th century, it represents the foundational era of mechanized agriculture.
Engine and Performance
The tractor is powered by a 1-cylinder, liquid-cooled gasoline engine with a displacement of 704 cubic inches (11.5 liters). It operates at a low engine speed of 250-300 RPM. The engine features a bore and stroke of 8.00 by 14.00 inches and requires a coolant capacity of 232 quarts (219.6 liters). Starting is achieved via a manual hand-crank mechanism. The unit provides a claimed belt power of 15 hp, specifically designed to handle a 3-plow load.
Transmission and Mechanical Layout
The Type A 15HP utilizes a gear-based transmission system providing one forward and one reverse gear. It is configured with a two-wheel drive system and manual steering. The operator station is an open design, equipped with a steel canopy for basic overhead protection.
Dimensions and Chassis
The tractor is built for stability and traction, weighing 9,900 lbs (4,490 kg) with an overall width of 90 inches (228 cm). It is fitted with 56x18 inch steel rear wheels, which were standard for the agricultural conditions and soil types encountered during its period of production.
Conclusion
With its robust cast-iron construction and simple mechanical design, the International Harvester Type A 15HP is categorized as a significant historical artifact. It is primarily suited for static displays, museum collections, and historical agricultural demonstrations rather than modern commercial farming operations.
Production Information of International Harvester, Type A 15HP
- Standard-tread tractor
- Built in Upper Sandusky, Ohio, USA
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, Type A 15HP
| Width | 90 inches [228 cm] |
|---|---|
| Weight | 9900 lbs [4490 kg] |
| Ag rear | 56x18 (steel) |
|---|
Engine Specifications of International Harvester, Type A 15HP
- International Harvester
- Liquid-cooled
- Gasoline
- 1-cylinder
| Operating RPM | 250-300 |
|---|---|
| Displacement | 704 ci [11.5 L] |
| Starter type | Hand-crank |
| Bore/Stroke | 8.00x14.00 inches [203 x 356 mm] |
| Coolant capacity | 232 qts [219.6 L] |
Transmission Information of International Harvester, Type A 15HP
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 1 forward and reverse |
Mechanical Specs of International Harvester, Type A 15HP
- Two-wheel drive
- Manual steering
- Open station with steel canopy.
Power Information of International Harvester, Type A 15HP
| Belt (claimed) | 15 hp [11.2 kW] |
|---|---|
| Plows | 3 |
Where it sits
With 16 hp[B] HP, the International Harvester Type A 15HP sits between Type A 12HP (13 HP) and Type A 20HP (22 HP) in International Harvester's range.
Frequently asked questions
How much horsepower does the International Harvester Type A 15HP have?
The International Harvester Type A 15HP delivers 16 hp[B] HP.
What years was the International Harvester Type A 15HP produced?
The International Harvester Type A 15HP was produced in 1908-1911.
What engine does the International Harvester Type A 15HP have?
The International Harvester Type A 15HP is powered by a Gasoline, 1-cylinder engine.
What transmission does the International Harvester Type A 15HP use?
The International Harvester Type A 15HP uses a Gear transmission.
How much does the International Harvester Type A 15HP weigh?
The International Harvester Type A 15HP weighs 9900 lbs [4490 kg].
Is the International Harvester Type A 15HP 4WD?
The International Harvester Type A 15HP is available in 2WD.