
Iseki TE4270
Power
29 hp
Production
unknown
Engine
Diesel, 3-cylinder
Transmission
Synchromesh
Weight
2249 lbs [1020 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Iseki, TE4270
The production information of the tractor (TE4270) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Iseki |
|---|
Dimension and Tires Information of Iseki, TE4270
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 41.3 inches [104 cm] |
|---|---|
| Wheelbase | 65 inches [165 cm] |
| 4WD Height | 79.9 inches [202 cm] |
| 2WD Height | 78 inches [198 cm] |
| Length | 115.8 inches [294 cm] |
| 2WD Ground clearance | 14.6 inches [37 cm] |
| 2WD Weight | 2249 lbs [1020 kg] |
| Width | 52 inches [132 cm] |
| Rear tread | 40.2 to 52.8 inches [102 to 134 cm] |
| 2WD Front tread | 37.8 to 41.7 inches [96 to 105 cm] |
| 4WD Ground clearance | 13.4 inches [34 cm] |
| 4WD Weight | 2447 lbs [1109 kg] |
| 2WD Standard tires (ag) | Front: 5.00-15. Rear: 12.2-24 |
|---|---|
| 4WD Standard tires (ag) | Front: 7-16. Rear: 12.2-24 |
Engine Specifications of Iseki, TE4270
Get the specifications for the engine and if different options are available.
| Isuzu E3AE1 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Rated RPM | 2600 |
|---|---|
| Displacement | 79.1 ci [1.3 L] |
| Power (gross) | 29.6 hp [22.1 kW] |
| Bore/Stroke | 3.15x3.386 inches [80 x 86 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Pre-heating | Glow plugs |
| Air cleaner | Dry |
| Power (net) | 26.6 hp [19.8 kW] |
Transmission Information of Iseki, TE4270Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3), plus reverse (R), in three ranges (L/M/H) with additional creeper range. |
| Type | Synchromesh |
|---|---|
| Gears | 18 forward and 6 reverse |
| Clutch | Dry disc |
Mechanical Specs of Iseki, TE4270Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Wet disc brakes |
| Steering | Manual |
|---|---|
| Steering | Power OptOptional |
Power Information of Iseki, TE4270Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2540 | |
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@2280 |
Hydraulics Specifications of Iseki, TE4270
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 5.5 gpm [20.8 lpm] |
|---|
Three-Point Hitch of Iseki, TE4270
Hitch category and rear/front lift capacity.
| Rear Type | JISI |
|---|---|
| Control | Position control with optional draft control |
Electrical System of Iseki, TE4270
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Iseki TE4270 have?
The Iseki TE4270 delivers 29 HP.
What years was the Iseki TE4270 produced?
The Iseki TE4270 was produced in unknown.
What engine does the Iseki TE4270 have?
The Iseki TE4270 is powered by a Diesel, 3-cylinder engine.
What transmission does the Iseki TE4270 use?
The Iseki TE4270 uses a Synchromesh transmission.
How much does the Iseki TE4270 weigh?
The Iseki TE4270 weighs 2249 lbs [1020 kg].
Is the Iseki TE4270 4WD?
The Iseki TE4270 is available in 2WD/4WD.