Iseki TE4320
Power
34 hp
Production
unknown
Engine
Diesel, 4-cylinder
Transmission
Synchromesh
Weight
2910 lbs [1319 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Iseki, TE4320
The production information of the tractor (TE4320) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Iseki |
|---|
Dimension and Tires Information of Iseki, TE4320
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 14.2 inches [36 cm] |
|---|---|
| Wheelbase | 70.9 inches [180 cm] |
| 2WD Weight | 2910 lbs [1319 kg] |
| Height | 78.7 inches [199 cm] |
| Length | 126 inches [320 cm] |
| 2WD Front tread | 45.3 to 61 inches [115 to 154 cm] |
| 4WD Weight | 3142 lbs [1425 kg] |
| Width | 59.1 inches [150 cm] |
| Rear tread | 44.9 to 59.1 inches [114 to 150 cm] |
| 4WD Front tread | 47.6 inches [120 cm] |
| 2WD Standard tires (ag) | Front: 6.00-16. Rear: 12.4-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8-18. Rear: 12.4-28 |
Engine Specifications of Iseki, TE4320
Get the specifications for the engine and if different options are available.
| Isuzu 4FA1 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 7.5 qts [7.1 L] |
|---|---|
| Displacement | 90.7 ci [1.5 L] |
| Power (gross) | 34.5 hp [25.7 kW] |
| Bore/Stroke | 2.992x3.228 inches [76 x 82 mm] |
| Exhaust valve clearance | 0.010 inches [0.254 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Power (net) | 31.6 hp [23.6 kW] |
Transmission Information of Iseki, TE4320Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3), plus reverse (R), in three ranges (L/M/H) with additional creeper range. |
| Type | Synchromesh |
|---|---|
| Gears | 18 forward and 6 reverse |
| Oil capacity | 47.6 qts [45.0 L] |
Mechanical Specs of Iseki, TE4320Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Power steering |
| Mechanical wet disc brakes |
Power Information of Iseki, TE4320Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Iseki, TE4320
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2060 psi [142.0 bar] |
|---|---|
| Total flow | 7.7 gpm [29.1 lpm] |
| Steering flow | 3.3 gpm [12.5 lpm] |
Three-Point Hitch of Iseki, TE4320
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2712 lbs [1230 kg] |
Electrical System of Iseki, TE4320
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 80 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 35 |
Frequently asked questions
How much horsepower does the Iseki TE4320 have?
The Iseki TE4320 delivers 34 HP.
What years was the Iseki TE4320 produced?
The Iseki TE4320 was produced in unknown.
What engine does the Iseki TE4320 have?
The Iseki TE4320 is powered by a Diesel, 4-cylinder engine.
What transmission does the Iseki TE4320 use?
The Iseki TE4320 uses a Synchromesh transmission.
How much does the Iseki TE4320 weigh?
The Iseki TE4320 weighs 2910 lbs [1319 kg].
Is the Iseki TE4320 4WD?
The Iseki TE4320 is available in 2WD/4WD.