Introduction
J.I. Case 1210 Utility Tractor
The J.I. Case 1210 is a utility tractor manufactured in Meltham Mills, Huddersfield, England, between 1976 and 1980. This model, which shares its mechanical platform with the David Brown 1210 and 1212 series, was designed for general agricultural operations.
Engine and Performance
The tractor is powered by a David Brown 4-cylinder diesel engine with a displacement of 219 cubic inches (3.6 liters). This liquid-cooled unit features a bore and stroke of 100 mm by 114 mm, providing consistent power delivery for standard farm tasks.
Transmission and Drivetrain
Operators can choose between two primary transmission configurations: a 12-speed synchromesh gearbox or the Hydra-Shift partial power shift transmission, both offering 12 forward and 4 reverse gears. The tractor is available in either two-wheel or four-wheel drive variants to suit varying terrain requirements.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a pump flow rate of 8 gallons per minute (30.3 liters per minute) and a total capacity of 13 gallons (49.2 liters). It is equipped with a single valve and a Category II rear hitch for implement attachment.
Dimensions and Chassis
With a wheelbase of 90 inches (228 cm) and a total weight of 7,100 lbs (3,220 kg), the 1210 provides a balanced platform for field work. The machine is fitted with 7.50-16 front tires and 18.4-34 rear tires. The operator station is an open design, equipped with a Roll-Over Protective Structure (ROPS).
Conclusion
The J.I. Case 1210 serves as a robust utility tractor suitable for a wide range of agricultural applications. Its combination of mechanical simplicity, multiple transmission options, and reliable David Brown engine architecture makes it a functional choice for traditional farming environments.
Production Information of J.I. Case, 1210
- The J.I. Case 1210 was the same tractor as the David Brown 1210 (syncho) and David Brown 1212 (power shift).
- Utility tractor
- Built in Meltham Mills, Huddersfield, England
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, 1210
| Wheelbase | 90 inches [228 cm] |
|---|---|
| Weight | 7,100 lbs [3220 kg] |
| Ag front | 7.50-16 |
|---|---|
| Ag rear | 18.4-34 |
Engine Specifications of J.I. Case, 1210
- David Brown
- Liquid-cooled
- Diesel
- 4-cylinder
| Displacement | 219 ci [3.6 L] |
|---|---|
| Bore/Stroke | 3.939x4.50 inches [100 x 114 mm] |
Transmission Information of J.I. Case, 1210
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Transmission | Hydra-Shift |
|---|---|
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
- 12-speed synchromesh
- 12-speed partial power shift
Mechanical Specs of J.I. Case, 1210
- Two- or four-wheel drive
- Open operator station. ROPS.
Power Information of J.I. Case, 1210
| Rear PTO | Independen |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of J.I. Case, 1210
| Type | Open center |
|---|---|
| Pump flow | 8 gpm [30.3 lpm] |
| Capacity | 13 gal [49.2 L] |
| Valves | 1 |
Three-Point Hitch of J.I. Case, 1210
| Rear Type | II |
|---|
Electrical System of J.I. Case, 1210
| Ground | Negative |
|---|
Frequently asked questions
How much horsepower does the J.I. Case 1210 have?
The J.I. Case 1210 delivers unknown HP.
What years was the J.I. Case 1210 produced?
The J.I. Case 1210 was produced in 1976-1980.
What engine does the J.I. Case 1210 have?
The J.I. Case 1210 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case 1210 use?
The J.I. Case 1210 uses a Synchromesh transmission.
How much does the J.I. Case 1210 weigh?
The J.I. Case 1210 weighs 7,100 lbs [3220 kg].
Is the J.I. Case 1210 4WD?
The J.I. Case 1210 is available in 2WD/4WD.