
J.I. Case VA
Power
18 hp[P] hp
Production
1942-1955
Engine
Gasoline, 4-cylinder
Transmission
Unsynchronized gear
Weight
3200 lbs [1451 kg]
Drive
2WD
From the same series:
Introduction
Production Information of J.I. Case, VA
The production information of the tractor (VA) includes details about its manufacturing.
| The Case VA series replaced the V series in 1942. A number of variants on the VA series were available. The VA was the standard-tread model. The VAC was tricycle row-crop model; the VAI was the industrial model; the VAO was the orchard model; the VAIW was the warehouse model; the VAH was the high-clearance row-crop model, and the VAS was the offset high-clearance row-crop model. Electric start was optional. During the early years, the engine was made by Continental. The VA series was the first Case tractors to use the Eagle Hitch, introduced in 1949. |
| Original price was $1,580 in 1955 |
| Standard-tread tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, VA
This section sums up the dimension and tires information of the tractor.
| Rear tread | 48 to 72 inches [121 to 182 cm] |
|---|---|
| Wheelbase | 75.25 inches [191 cm] |
| Ground clearance | 15.6 inches [39 cm] |
| Weight | 3200 lbs [1451 kg] |
| Length | 116.25 inches [295 cm] |
| Front tread | 48.25 inches [122 cm] |
| Height (hood) | 51.5 inches [130 cm] |
| Ag front | 6.00-15 |
|---|---|
| Ag rear | 10-28 |
Engine Specifications of J.I. Case, VA
Get the specifications for the engine and if different options are available.
| J.I. Case |
| Liquid-cooled |
| Gasoline |
| 4-cylinder |
| Exhaust valve clearance | 0.014 inches (cold) [0.356 mm] |
|---|---|
| Intake valve clearance | 0.014 inches (cold) [0.356 mm] |
| Compression | 6:1 |
| Exhaust valve clearance | 0.014 inches (cold) [0.356 mm] |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Rated RPM | 1425 |
| Displacement | 124 ci [2.0 L] |
| Air cleaner | Oil bath |
| Bore/Stroke | 3.25x3.75 inches [83 x 95 mm] |
| Point gap | 0.020 inches [0.508 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Coolant capacity | 13 qts [12.3 L] |
Transmission Information of J.I. Case, VAY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 4 forward and 1 reverse |
| Clutch | 228.6mm dry disc |
Mechanical Specs of J.I. Case, VAY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Manual steering |
| Open operator station. |
Power Information of J.I. Case, VAY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 525@1425 |
Three-Point Hitch of J.I. Case, VA
Hitch category and rear/front lift capacity.
| Type | Case Eagle Hitch |
|---|
Electrical System of J.I. Case, VA
Battery voltage, charging system and ground.
| Ground | Positive |
|---|---|
| Battery volts | 6 |
| Charging system | Generator |
| Charging amps | 12 |
Frequently asked questions
How much horsepower does the J.I. Case VA have?
The J.I. Case VA delivers 18 hp[P] HP.
What years was the J.I. Case VA produced?
The J.I. Case VA was produced in 1942-1955.
What engine does the J.I. Case VA have?
The J.I. Case VA is powered by a Gasoline, 4-cylinder engine.
What transmission does the J.I. Case VA use?
The J.I. Case VA uses a Unsynchronized gear transmission.
How much does the J.I. Case VA weigh?
The J.I. Case VA weighs 3200 lbs [1451 kg].
Is the J.I. Case VA 4WD?
The J.I. Case VA is available in 2WD.