Introduction
Production Information of J.I. Case, CF 250
The production information of the tractor (CF 250) includes details about its manufacturing.
| Utility tractor |
| Built in Vierzon, France |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, CF 250
This section sums up the dimension and tires information of the tractor.
| Front tread | 48 to 70.5 inches [121 to 179 cm] |
|---|---|
| Wheelbase | 68.9 inches [175 cm] |
| Weight | 3527 lbs [1599 kg] |
| Height | 62.6 inches [159 cm] |
| Length | 117.7 inches [298 cm] |
| Rear tread | 48 to 75.6 inches [121 to 192 cm] |
| Ground clearance | 18.9 inches [48 cm] |
| Width | 64.6 inches [164 cm] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 10-28 |
| Ag rear | 11-28 |
Engine Specifications of J.I. Case, CF 250
Get the specifications for the engine and if different options are available.
| Indenor XDP85 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Coolant capacity | 10.8 qts [10.2 L] |
|---|---|
| Fuel system | Indirect injection |
| Air cleaner | Oil bath |
| Rated RPM | 2200 |
| Compression | 21:1 |
| Displacement | 110.8 ci [1.8 L] |
| Power | 25 hp [18.6 kW] |
| Bore/Stroke | 3.35x3.15 inches [85 x 80 mm] |
| Oil capacity | 4.2 qts [4.0 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of J.I. Case, CF 250Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in two ranges, plus reverse range. |
| Type | Gear |
|---|---|
| Gears | 8 forward and 4 reverse |
Mechanical Specs of J.I. Case, CF 250Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Mechanical drum brakes |
| Manual steering |
| Open operator station. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of J.I. Case, CF 250Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 1000 |
| Rear PTO Type | 540/1000 |
| Mid PTO | Independent |
Hydraulics Specifications of J.I. Case, CF 250
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 2.25 gal [8.5 L] |
|---|
Three-Point Hitch of J.I. Case, CF 250
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|
Frequently asked questions
How much horsepower does the J.I. Case CF 250 have?
The J.I. Case CF 250 delivers 25 HP.
What years was the J.I. Case CF 250 produced?
The J.I. Case CF 250 was produced in 1962-1966.
What engine does the J.I. Case CF 250 have?
The J.I. Case CF 250 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case CF 250 use?
The J.I. Case CF 250 uses a Gear transmission.
How much does the J.I. Case CF 250 weigh?
The J.I. Case CF 250 weighs 3527 lbs [1599 kg].
Is the J.I. Case CF 250 4WD?
The J.I. Case CF 250 is available in 2WD.