Introduction
Production Information of J.I. Case, 1494
The production information of the tractor (1494) includes details about its manufacturing.
| Utility tractor |
| Built in Meltham Mills, Huddersfield, England |
| Manufacturer | J.I. Case |
|---|---|
| Original price | $24,100 (1988) |
Dimension and Tires Information of J.I. Case, 1494
This section sums up the dimension and tires information of the tractor.
| Front tread | 60 to 76 inches [152 to 193 cm (4WD)] |
|---|---|
| Wheelbase | 88.5 inches [224 cm] |
| 16.5 inches (2WD) [41 cm] | |
| Ground clearance | 14 inches (4WD) [35 cm] |
| Width | 75 inches [190 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| Front tread | 56 to 80 inches [142 to 203 cm (2WD)] |
| Height (cab) | 102 inches [259 cm] |
| 16.9-34 | |
| Ag front | 7.50-16 (2WD) |
| 12.4-24 (4WD) | |
| 10.00-16 (2WD) | |
| 7.50-18 (2WD) | |
| 13.6-38 | |
| Ag rear | 18.4-34 |
| 11L-15 (2WD) |
Engine Specifications of J.I. Case, 1494
Get the specifications for the engine and if different options are available.
| Case |
| Liquid-cooled |
| 4-cylinder |
| Turbocharged diesel |
| Compression | 16:1 |
|---|---|
| Torque RPM | 1600 |
| Displacement | 219 ci [3.6 L] |
| Bore/Stroke | 3.937x4.50 inches [100 x 114 mm] |
| Power | 85 hp [63.4 kW] |
| Torque | 218.3 lb-ft [296.0 Nm] |
| Rated RPM | 2200 |
| Coolant capacity | 15 qts [14.2 L] |
| Oil capacity | 7.8 qts [7.4 L] |
| Starter volts | 12 |
Transmission Information of J.I. Case, 1494Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Oil capacity | 33.6 qts [31.8 L] |
Transmission variants 2
| Transmission | Hydra-Shift |
|---|---|
| Oil capacity | 33.6 qts [31.8 L] |
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
| 12-speed synchromesh |
| 12-speed partial power shift |
Mechanical Specs of J.I. Case, 1494Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab optional with air-conditioning. |
| Disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of J.I. Case, 1494Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of J.I. Case, 1494
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1850 psi [127.6 bar] |
|---|---|
| Type | Open center |
| 15.3 gpm (tandem) [57.9 lpm] | |
| Total flow | 8.5 gpm [32.2 lpm] |
| Pressure | 2475 psi [170.7 bar] |
| Steering flow | 7.7 gpm [29.1 lpm] |
| Valves | 1 to 3 |
Three-Point Hitch of J.I. Case, 1494
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at ends) | 5,366 lbs [2434 kg] |
| Rear lift (at 24"/610mm) | 3,210 lbs [1456 kg] |
Electrical System of J.I. Case, 1494
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Battery CCA | 420 |
| 65 (heavy duty) | |
| Charging system | Alternator |
| Battery AH | 96 |
| 550 (heavy duty) | |
| Charging amps | 45 |
| 128 (heavy duty) |
Frequently asked questions
How much horsepower does the J.I. Case 1494 have?
The J.I. Case 1494 delivers 85 HP.
What years was the J.I. Case 1494 produced?
The J.I. Case 1494 was produced in 1983-1984.
What engine does the J.I. Case 1494 have?
The J.I. Case 1494 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the J.I. Case 1494 use?
The J.I. Case 1494 uses a Synchromesh transmission.
Is the J.I. Case 1494 4WD?
The J.I. Case 1494 is available in 2WD/4WD.