Introduction
Production Information of John Deere, 1020
The production information of the tractor (1020) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | John Deere |
|---|---|
| Mexico | |
| Mannheim, Baden-Württemberg, Germany | |
| Original price | $4,500 |
| Factories | Dubuque, Iowa, USA |
Dimension and Tires Information of John Deere, 1020
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 74.325 inches [188 cm] |
|---|---|
| Height (exhaust) | 76.5 inches [194 cm] |
| Height (hood) | 51.2 inches [130 cm] |
| Length | 120.25 inches [305 cm] |
| Ground clearance | 20.5 inches [52 cm] |
| Width | 60.75 inches [154 cm] |
| Ag front | 5.50-16 |
|---|---|
| 13.9-36 | |
| 12.4-36 | |
| 6.00-14 | |
| Ag rear | 18.4-16A |
| Ag front | 9.00-10 |
| 14.9-24 | |
| 12.4-24 | |
| 7.50-15 | |
| Ag rear | 12.4-28 |
| 7.50-16 | |
| 11.2-24 | |
| 6.00-16 | |
| 14.9-28 | |
| 13.6-28 | |
| 16.9-24 |
Engine Specifications of John Deere, 1020
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Firing order | 1-2-3 |
|---|---|
| Displacement | 152 ci [2.5 L] |
| Dry paper element OptOptional | |
| Bore/Stroke | 3.858x4.33 inches [98 x 110 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Compression | 16.7:1 |
| Air cleaner | Oil bath |
Transmission Information of John Deere, 1020Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (I/II) plus reverse (R) range. |
| Type | Collar shift |
|---|---|
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Transmission variants 2
| Four gears (1-4) in two ranges (I/II) plus reverse (R) range. Left-hand power shift lever on dash. |
| Type | Two-speed power shift |
|---|---|
| Gears | 16 forward and 8 reverse |
| Clutch | Dry disc |
Transmission variants 3
| Four gears (1-4) in two ranges (I/II) with left-hand reverser lever. Reverse only available in low (I) range. |
| Type | Power shuttle |
|---|---|
| Gears | 8 forward and 4 reverse |
| 8-speed collar shift |
| 16-speed two-speed power shift |
| 8-speed power shuttle |
Mechanical Specs of John Deere, 1020Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Open operator station. |
| Two-wheel drive |
| Differential hydraulic wet disc brakes |
| Steering | Power OptOptional |
|---|---|
| Steering | Manual |
| Final drives | Planetary |
| Differential lock | Mechanical rear OptOptional |
Power Information of John Deere, 1020Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| 1000@2100 | |
| Rear PTO | Transmission |
| 540/1000 OptOptional | |
| Rear PTO Type | 540 |
| Live *Two-stage clutch, optional. | |
| Engine RPM | 540@2100 |
| Independent *Optional. |
Hydraulics Specifications of John Deere, 1020
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Capacity | 10 gal [37.9 L] |
| Pump flow | 10.5 gpm [39.7 lpm] |
Three-Point Hitch of John Deere, 1020
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift | 2010 lbs [911 kg] |
Electrical System of John Deere, 1020
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the John Deere 1020 have?
The John Deere 1020 delivers 43 hp[P] HP.
What years was the John Deere 1020 produced?
The John Deere 1020 was produced in 1965-1973.
What engine does the John Deere 1020 have?
The John Deere 1020 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 1020 use?
The John Deere 1020 uses a Collar shift transmission.
Is the John Deere 1020 4WD?
The John Deere 1020 is available in 2WD.