Introduction
Production Information of John Deere, 1010
The production information of the tractor (1010) includes details about its manufacturing.
| The John Deere 1010 was available in multiple versions. Row Crop (R), Single Row Crop (RS), Row Crop Utility (RU), Orchard (O), Utility (U), and Industrial Wheel (W) in addition to two crawler types. Also a low-cost Special Row Crop Utility (RUS) version was made that was $300 less than regular models. It had only a pan seat and 540 RPM PTO. |
| Utility tractor |
| Original price was $3,500 in 1965 |
| Built in Dubuque, Iowa, USA |
| Manufacturer | John Deere |
|---|---|
| 9,792 *Total for both types of 1010RU. 7,048 gasoline and 2,744 diesel. | |
| Total built | 44,377 *Total for all variants of the John Deere 1010. |
Dimension and Tires Information of John Deere, 1010
This section sums up the dimension and tires information of the tractor.
| RU Wheelbase | 82.5 inches [209 cm] |
|---|---|
| 1010RU Front tread | 50 to 80 inches [127 to 203 cm] |
| 1010RU Height (exhaust) | 72.3 inches [183 cm] |
| 1010RU Length | 121.5 inches [308 cm] |
| 1010RU Rear tread | 56 to 89 inches [142 to 226 cm] |
| 1010RU Height (hood) | 55.875 inches [141 cm] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 12-28 |
| Ag rear | 10-34 |
| Ag front | 6.00-16 |
Engine Specifications of John Deere, 1010
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Gasoline |
| 4-cylinder |
| Compression | 8.3:1 |
|---|---|
| Displacement | 115.5 ci [1.9 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 3.50x3.00 inches [89 x 76 mm] |
| Coolant capacity | 11 qts [10.4 L] |
| Starter volts | 12 |
Transmission Information of John Deere, 1010Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Shift lever for the 1010 was originally on the dash. Starting with the 1963 model year (serial number 031001) the shifter was moved to the top of the transmission. |
| Type | Sliding gear |
|---|---|
| Gears | 5 forward and 1 reverse |
| Clutch | Dry disc |
Mechanical Specs of John Deere, 1010Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Mechanical disc brakes |
| Steering | Manual |
|---|---|
| Steering | Power OptOptional |
Power Information of John Deere, 1010Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| 540/1000 *Optional. | |
| Independent OptOptional | |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 1010
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 4.5 gal [17.0 L] |
Three-Point Hitch of John Deere, 1010
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Frequently asked questions
How much horsepower does the John Deere 1010 have?
The John Deere 1010 delivers 40 hp[P] HP.
What years was the John Deere 1010 produced?
The John Deere 1010 was produced in 1960-1965.
What engine does the John Deere 1010 have?
The John Deere 1010 is powered by a Gasoline, 4-cylinder engine.
What transmission does the John Deere 1010 use?
The John Deere 1010 uses a Sliding gear transmission.
Is the John Deere 1010 4WD?
The John Deere 1010 is available in 2WD.