Introduction
Production Information of John Deere, 2010
The production information of the tractor (2010) includes details about its manufacturing.
| Original price was $4,600 in 1965 |
| Row-Crop tractor |
| Built in Dubuque, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2010
This section sums up the dimension and tires information of the tractor.
| Row-crop Clearance (front axle) | 23.75 inches [60 cm] |
|---|---|
| Row-crop Wheelbase | 90 inches [228 cm] |
| Row-crop Width | 86 inches [218 cm] |
| Utility Length | 139.75 inches [354 cm] |
| Utility Wheelbase | 86.9 inches [220 cm] |
| Utility Clearance (front axle) | 19.625 inches [49 cm] |
| Utility Width | 71 inches [180 cm] |
| Row-crop Length | 140 inches [355 cm] |
| Ag front | 6.00/6.50/7.50-16 (utility) |
|---|---|
| 9.00-10 (row-crop) | |
| 6.50-16 | |
| Ag rear | 12.4/13.6/14.9-28 (utility) |
| Ag rear | 11.2/12.4/13.9-36 (row-crop) |
| Ag front | 6.00-14 |
Engine Specifications of John Deere, 2010
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| LP gas |
| 4-cylinder |
| Air cleaner | Oil bath |
|---|---|
| Displacement | 144.5 ci [2.4 L] |
| Compression | 8.9:1 |
| Bore/Stroke | 3.625x3.50 inches [92 x 89 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
Transmission Information of John Deere, 2010Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | John Deere Syncro-Range |
|---|---|
| Gears | 8 forward and 3 reverse |
Mechanical Specs of John Deere, 2010Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical dry disc brakes |
| Steering | Manual |
|---|---|
| Steering | Power OptOptional |
Power Information of John Deere, 2010Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@1900 |
Hydraulics Specifications of John Deere, 2010
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 11 gpm [41.6 lpm] |
| Valves | 1 or 2 |
| Capacity | 8 gal [30.3 L] |
| Pressure | 1150 psi [79.3 bar] |
Three-Point Hitch of John Deere, 2010
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
Electrical System of John Deere, 2010
Battery voltage, charging system and ground.
| Ground | Positive |
|---|---|
| Battery volts | 12 |
| Diesel Battery CCA | 625 |
| Charging system | Generator |
| Gas Battery CCA | 420 |
Frequently asked questions
How much horsepower does the John Deere 2010 have?
The John Deere 2010 delivers 51 hp[P] HP.
What years was the John Deere 2010 produced?
The John Deere 2010 was produced in 1960-1965.
What engine does the John Deere 2010 have?
The John Deere 2010 is powered by a LP gas, 4-cylinder engine.
What transmission does the John Deere 2010 use?
The John Deere 2010 uses a John Deere Syncro-Range transmission.
Is the John Deere 2010 4WD?
The John Deere 2010 is available in 2WD.