Introduction
John Deere 2150 Utility Tractor
The John Deere 2150 is a utility tractor manufactured in Mannheim, Germany, between 1983 and 1986. It is designed for versatile agricultural applications, offering a balance of maneuverability and operational power.
Engine and Power
The tractor is powered by a 2.9-liter, 3-cylinder liquid-cooled diesel engine. It operates at a rated speed of 2500 RPM. The engine features a bore/stroke ratio of 106 x 110 mm and a compression ratio of 17.4:1, providing a power output of 50 horsepower.
Transmission and Drivetrain
Multiple transmission configurations were available: an 8-speed partially synchronized unit, a 16-speed two-speed power shift (Hi-Lo), and an 8-speed power shuttle (Direction Reverser). The machine was produced in both two-wheel drive and four-wheel drive variants, utilizing inboard planetary final drives and mechanical rear differential locks.
Hydraulics and PTO
The hydraulic system utilizes a closed-center design, delivering a pump flow of 13 gpm (49.2 lpm) at a pressure of 2250 psi. The rear power take-off (PTO) is independent and operates at 540 RPM. The rear hitch, categorized as Type II/I, features load and depth control with a lift capacity of 2023 lbs (917 kg).
Mechanical and Dimensions
The tractor is equipped with power steering and differential hydraulic wet disc brakes. The 2WD model features a 74.4-inch wheelbase, while the 4WD version extends to 80.9 inches. Various tire configurations are available to suit agricultural or lawn and turf maintenance requirements.
Conclusion
The John Deere 2150 serves as a robust utility tractor suited for varied farming tasks, combining German manufacturing standards with a flexible range of transmission and drivetrain options for diverse field conditions.
Production Information of John Deere, 2150
- Utility tractor
- Built in Mannheim, Baden-Württemberg, Germany
| Manufacturer | John Deere |
|---|---|
| Manufacturer(optional) | $21,455 (1983 4WD ) |
| Original price | $16,425 (1983 2WD ) |
Dimension and Tires Information of John Deere, 2150
- Flange rear axle
| Rear tread | 55 to 79 inches [139 to 200 cm] |
|---|---|
| 2WD Wheelbase | 74.4 inches [188 cm] |
| Width | 68.7 inches [174 cm] |
| 4WD Length | 122.6 inches [311 cm] |
| 4WD Wheelbase | 80.9 inches [205 cm] |
| 2WD Clearance (front axle) | 20.3 inches [51 cm] |
| 2WD Length | 120.3 inches [305 cm] |
| Front tread | 43 to 77.5 inches [109 to 196 cm (4WD)] |
| Front tread | 49.6 to 79.5 inches [125 to 201 cm (2WD)] |
| 4WD Clearance (front axle) | 16.4 inches [41 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 13.6-28 |
|---|---|
| Lawn/turf rear | 16.9-24 |
| 4WD Standard tires (ag) | Front: 9.5-24. Rear: 16.9-28 |
| Lawn/turf front | 27x9.5-15 |
Engine Specifications of John Deere, 2150
- John Deere
- Liquid-cooled
- Diesel
- 3-cylinder
| Operating RPM | 1500-2500 |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Air cleaner | Dual paper elements |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Coolant capacity | 11 qts [10.4 L] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Compression | 17.4:1 |
| Fuel use | 3.214 gal/hour [12.2 l/hour] |
Transmission Information of John Deere, 2150
Transmission variants 1
- Four gears in two ranges, plus reverse range. Synchronized shifting between gears.
| Transmission | John Deere Top-Shaft Synchronized |
|---|---|
| Type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
Transmission variants 2
- The Hi-Low adds a hydraulic power shift to the standard TSS transmission. A left-hand lever enables a clutchless shift between direct (high) range and a lower range.
| Transmission | John Deere Hi-Lo TSS |
|---|---|
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 3
- The Direction Reverser transmission provides clutchless hydraulic shuttle shifting using a left-hand reverser lever. Reverser not available with 4WD or cab. Reverse only operates in low range.
| Transmission | John Deere Direction Reverser |
|---|---|
| Type | Power shuttle |
| Gears | 8 forward and 4 reverse |
- 8-speed partially synchronized
- 16-speed two-speed power shift
- 8-speed power shuttle
Mechanical Specs of John Deere, 2150
- Two- or four-wheel drive
- Differential hydraulic wet disc brakes
- Power steering
- Two-post fixed ROPS. Canopy available.
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 2150
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | Live (with reverser) |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 2150
| Type | Closed center |
|---|---|
| Pump flow | 13 gpm [49.2 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Rear valves | 0 to 2 |
Three-Point Hitch of John Deere, 2150
| Rear Type | II/I |
|---|---|
| Control | Load and depth control |
| Rear lift | 2023 lbs [917 kg] |
Electrical System of John Deere, 2150
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery AH | 55 |
| Charging amps | 33 |
Where it sits
With 50 hp[P] HP, the John Deere 2150 sits just below 2155 (55 HP) in John Deere's range. Its power puts it in the 35th percentile of 1980s models in our database (2052 machines).
Frequently asked questions
How much horsepower does the John Deere 2150 have?
The John Deere 2150 delivers 50 hp[P] HP.
What years was the John Deere 2150 produced?
The John Deere 2150 was produced in 1983-1986.
What engine does the John Deere 2150 have?
The John Deere 2150 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 2150 use?
The John Deere 2150 uses a John Deere Top-Shaft Synchronized transmission.
Is the John Deere 2150 4WD?
The John Deere 2150 is available in 2WD/4WD.