John Deere 2155 tractor

John Deere 2155

Power

55 hp

Production

1987-1992

Engine

Diesel, 3-cylinder

Transmission

John Deere Collar Shift (CST)

Drive

2WD/4WD

From the same series:

2355

Introduction

John Deere 2155 Utility Tractor

The John Deere 2155 is a utility tractor produced in Mannheim, Germany, between 1987 and 1992. It is designed for general agricultural applications, offering a balance of power and versatility through various transmission and drivetrain configurations.

Engine and Power

The tractor is powered by a 2.9-liter, 3-cylinder liquid-cooled diesel engine. It utilizes direct fuel injection to produce 55 horsepower at a rated engine speed of 2300 RPM. The engine features a 17.8:1 compression ratio and uses a dry-type air cleaner for intake filtration.

Transmission and Drivetrain

Multiple transmission options were available, ranging from the basic 8-speed non-synchronized Collar Shift (CST) to the 16-speed Top-Shaft Synchronized (TSS) transmission with partial power shift. The tractor was offered in both two-wheel drive and four-wheel drive variants, supported by mechanical rear differential locks and inboard planetary final drives.

Hydraulics and PTO

The hydraulic system utilizes a closed-center design providing a total flow of 13 gpm (49.2 lpm) at a pressure of 2250 psi. The rear power take-off (PTO) operates at 540 RPM at an engine speed of 2070 RPM, utilizing a two-stage clutch for independent control. A mid-PTO option was also available for specific implement requirements.

Dimensions and Hitch

The tractor features a Category II/I three-point hitch with lower-link draft sensing, offering a lift capacity of 2584 lbs (1172 kg) at 24 inches behind the lift points. Depending on the configuration, the wheelbase measures 80.7 inches for the 2WD model and 80.9 inches for the 4WD model.

Conclusion

The John Deere 2155 serves as a reliable utility tractor suitable for general farm duties. Its variety of transmission options and robust hydraulic capacity make it adaptable to a wide range of mounted and towed implements.

Production Information of John Deere, 2155

  • Original price was $18,000 in 1992
  • Utility tractor
  • Built in Mannheim, Baden-Württemberg, Germany
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 2155

Rear tread46.9 to 70.5 inches [119 to 179 cm]
2WD Wheelbase80.7 inches [204 cm]
2WD Width68.7 inches [174 cm]
4WD Length122.6 inches [311 cm]
4WD Wheelbase80.9 inches [205 cm]
4WD Clearance (front axle)14.4 inches [36 cm]
4WD Width72.4 inches [183 cm]
2WD Length120.3 inches [305 cm]
4WD Front tread53 to 77.5 inches [134 to 196 cm]
2WD Front tread49.6 to 79.5 inches [125 to 201 cm]
2WD Clearance (front axle)21 inches [53 cm]
2WD Standard tires (ag)Front: 6.50-16. Rear: 13.6-28
4WD Optional tires (ag)Front: 10.5-18. Rear: 14.9-24
4WD Standard tires (ag)Front: 9.5-24. Rear: 16.9-28
2WD Optional tires (ag)Front: 6.50-16. Rear: 14.9-24

Engine Specifications of John Deere, 2155

  • John Deere
  • Liquid-cooled inline
  • Diesel
  • 3-cylinder
Coolant capacity10.6 qts [10.0 L]
Fuel systemDirect injection
Air cleanerDry
Rated RPM2300 (CST)
Compression17.8:1
Displacement179 ci [2.9 L]
Power55 hp [41.0 kW]
Bore/Stroke4.19x4.33 inches [106 x 110 mm]
Oil capacity6.3 qts [6.0 L]
Starter volts12
Starter volts(optional)2500 (TSS)

Transmission Information of John Deere, 2155

Transmission variants 1

  • Four gears with two forward and one reverse range.
TransmissionJohn Deere Collar Shift (CST)
ClutchDry disc
TypeNon-synchronized
Gears8 forward and 4 reverse

Transmission variants 2

  • Four gears (1-4) with two ranges (I-II) and reverse range. Optional creeper range provides 12 forward and 8 reverse speeds.
TransmissionJohn Deere Top-Shaft Synchronized (TSS)
ClutchDry disc
TypePartially synchronized
Gears8 forward and 4 reverse

Transmission variants 3

  • Adds a hydraulic high-low power shift to the basic TSS transmission.
TransmissionJohn Deere Hi-Lo Top-Shaft Synchronized (TSS)
ClutchDry disc
TypePartial power shift
Gears16 forward and 8 reverse

Transmission variants 4

  • Adds a hydraulic reverse to the CST transmission.
TransmissionJohn Deere Collar Shift Reverser
TypePower shuttle
Gears8 forward and reverse
  • 8-speed non-synchronized
  • 8-speed power shuttle
  • 8-speed partially synchronized
  • 16-speed partial power shift

Mechanical Specs of John Deere, 2155

  • Two- or four-wheel drive
  • Differential hydraulic wet disc brakes
  • Power steering
  • Two-post fixed ROPS.
Final drivesInboard planetary
Differential lockMechanical rear

Power Information of John Deere, 2155

Rear PTOLive
Mid PTO(optional)Live
Engine RPM540@2070
Engine RPM(optional)Independent
Mid PTO Type1000
Rear PTO Type540 (1.375)

Two-stage clutch

Hydraulics Specifications of John Deere, 2155

TypeClosed center
Total flow13 gpm [49.2 lpm]
Pump flow12 gpm [45.4 lpm]
Pressure2250 psi [155.1 bar]
Valves0 to 3

Three-Point Hitch of John Deere, 2155

Rear TypeII/I
ControlLower-link draft sensing
Rear lift (at 24"/610mm)2584 lbs [1172 kg]

Electrical System of John Deere, 2155

GroundNegative
Battery CCA400
Batteries2
Charging systemAlternator
Battery volts12
Charging amps55

Where it sits

With 55 HP, the John Deere 2155 sits between 2150 (50 HP) and 2355 (64 HP) in John Deere's range. Its power puts it in the 39th percentile of 1980s models in our database (2052 machines).

Frequently asked questions

How much horsepower does the John Deere 2155 have?

The John Deere 2155 delivers 55 HP.

What years was the John Deere 2155 produced?

The John Deere 2155 was produced in 1987-1992.

What engine does the John Deere 2155 have?

The John Deere 2155 is powered by a Diesel, 3-cylinder engine.

What transmission does the John Deere 2155 use?

The John Deere 2155 uses a John Deere Collar Shift (CST) transmission.

Is the John Deere 2155 4WD?

The John Deere 2155 is available in 2WD/4WD.

Compare the John Deere 2155 with another model