Introduction
Production Information of John Deere, 1450
The production information of the tractor (1450) includes details about its manufacturing.
| Built in Japan |
| Utility tractor |
| $17,000 (1988 ) | |
| Distributor | John Deere |
| Original price | $16,309 (1983 2WD ) |
| Manufacturer | Yanmar |
| $20,609 (1983 4WD ) |
Dimension and Tires Information of John Deere, 1450
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 55 to 79.8 inches [139 to 202 cm] |
|---|---|
| 2WD Wheelbase | 82.8 inches [210 cm] |
| 4WD Width | 72.3 inches [183 cm] |
| 2WD Width | 66.6 inches [169 cm] |
| 4WD Wheelbase | 83 inches [210 cm] |
| Rear tread | 51 to 79 inches [129 to 200 cm] |
| 2WD Front tread | 56.7 to 76.4 inches [144 to 194 cm] |
| Length | 146.3 inches [371 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 14.9-28 |
|---|---|
| Lawn/turf rear | 21.5L-16.1 |
| Lawn/turf front | 27x9.50-15 |
| 4WD Standard tires (ag) | Front: 9.5-24. Rear: 14.9-28 |
| 4WD Optional tires (ag) | Front: 11.2-24. Rear: 16.9-28 |
Engine Specifications of John Deere, 1450
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Coolant capacity | 11.1 qts [10.5 L] |
|---|---|
| Fuel system | Direct injection |
| Air cleaner | Dry |
| Rated RPM | 2400 |
| Compression | 18:1 |
| Displacement | 190.3 ci [3.1 L] |
| Oil capacity | 12.7 qts [12.0 L] |
| Power (gross) | 55 hp [41.0 kW] |
| Oil change | 200 h |
| Bore/Stroke | 3.74x4.33 inches [95 x 110 mm] |
| Starter volts | 12 |
| Firing order | 1-3-4-2 |
| Idle RPM | 800-2575 |
Transmission Information of John Deere, 1450Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) in three ranges (I, II, III). Tractor must be stopped, and clutch used, to shift range or gear. |
| Type | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | Dry disc |
Mechanical Specs of John Deere, 1450Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Differential hydraulic wet disc brakes |
| Two-post ROPS. |
| Steering | Power assist |
|---|---|
| Final drives | Planetary |
| Differential lock | Mechanical |
Power Information of John Deere, 1450Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2250 |
Hydraulics Specifications of John Deere, 1450
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 10.7 gpm [40.5 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Valves | 0 to 2 |
Three-Point Hitch of John Deere, 1450
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Center link sensing with position and draft control |
| Rear lift (at 24"/610mm) | 2,652 lbs [1202 kg] |
Electrical System of John Deere, 1450
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 485 |
| Charging system | Alternator |
| Charging amps | 25 |
Frequently asked questions
How much horsepower does the John Deere 1450 have?
The John Deere 1450 delivers 55 HP.
What years was the John Deere 1450 produced?
The John Deere 1450 was produced in 1984-1988.
What transmission does the John Deere 1450 use?
The John Deere 1450 uses a Gear transmission.
Is the John Deere 1450 4WD?
The John Deere 1450 is available in 2WD/4WD.