Introduction
Production Information of John Deere, 1250
The production information of the tractor (1250) includes details about its manufacturing.
| Built in Japan |
| Compact Utility tractor |
| $18,700 (1988 ) | |
| Distributor | John Deere |
| Original price | $14,295 (1983 2WD ) |
| Manufacturer | Yanmar |
| $18,795 (1983 4WD ) |
Dimension and Tires Information of John Deere, 1250
This section sums up the dimension and tires information of the tractor.
| Rear tread | 51 to 79 inches [129 to 200 cm] |
|---|---|
| 2WD Wheelbase | 74.4 inches [188 cm] |
| Clearance (front axle) | 17.5 inches [44 cm] |
| Width | 65.2 inches [165 cm] |
| 4WD Wheelbase | 78.1 inches [198 cm] |
| Front tread | 55 to 74.8 inches [139 to 189 cm] |
| Length | 134.3 inches [341 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 13.6-28 |
|---|---|
| Lawn/turf rear | 21.5L-16.1 |
| 4WD Standard tires (ag) | Front: 9.5-24. Rear: 14.9-28 |
| Lawn/turf front | 27x9.50-15 |
Engine Specifications of John Deere, 1250
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Coolant capacity | 8.4 qts [7.9 L] |
|---|---|
| Fuel system | Direct injection |
| Air cleaner | Dry |
| Rated RPM | 2500 |
| Compression | 18:1 |
| Displacement | 142.7 ci [2.3 L] |
| Oil capacity | 11.2 qts [10.6 L] |
| Power (gross) | 44 hp [32.8 kW] |
| Oil change | 200 h |
| Bore/Stroke | 3.74x4.33 inches [95 x 110 mm] |
| Starter volts | 12 |
| Firing order | 1-3-2 |
| Idle RPM | 800-2675 |
Transmission Information of John Deere, 1250Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) in three ranges (I, II, III). Tractor must be stopped, and clutch used, to shift range or gear. |
| Type | Gear |
|---|---|
| Oil capacity | 33.3 qts [31.5 L] |
| Gears | 9 forward and 3 reverse |
| Clutch | Dry disc |
Mechanical Specs of John Deere, 1250Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Differential hydraulic wet disc brakes |
| Two-post ROPS. Canopy optional. |
| Steering | Power assist |
|---|---|
| Final drives | Inboard planetary |
| Differential lock | Mechanical rear |
Power Information of John Deere, 1250Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live *Two-stage clutch |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2295 |
Hydraulics Specifications of John Deere, 1250
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 15.9 gpm [60.2 lpm] |
| Pump flow | 11.2 gpm [42.4 lpm] |
| Pressure | 2200 psi [151.7 bar] |
| Steering flow | 4.7 gpm [17.8 lpm] |
| Valves | 0 to 2 |
Three-Point Hitch of John Deere, 1250
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Center-link draft sensing with position and control |
| Rear lift (at 24"/610mm) | 2240 lbs [1016 kg] |
Electrical System of John Deere, 1250
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 485 |
| Charging system | Alternator |
| Charging amps | 25 |
Frequently asked questions
How much horsepower does the John Deere 1250 have?
The John Deere 1250 delivers 44 HP.
What years was the John Deere 1250 produced?
The John Deere 1250 was produced in 1982-1989.
What transmission does the John Deere 1250 use?
The John Deere 1250 uses a Gear transmission.
Is the John Deere 1250 4WD?
The John Deere 1250 is available in 2WD/4WD.