John Deere 3720 tractor

John Deere 3720

Power

44 hp

Production

2005-2013

Engine

Turbocharged diesel, 3-cylinder

Transmission

Sauer-Danfoss eHydro

Weight

3,570 lbs [1619 kg]

Drive

4WD

From the same series:

3520

Introduction

Production Information of John Deere, 3720

The production information of the tractor (3720) includes details about its manufacturing.

Compact Utility tractor
Built in Augusta, Georgia, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 3720

This section sums up the dimension and tires information of the tractor.

Cab Weight3,570 lbs [1619 kg]
Wheelbase68 inches [172 cm]
Height (ROPS)93.3 inches [236 cm]
Height (hood)57 inches [144 cm]
Length120.2 inches [305 cm]
Clearance (rear axle)12.2 inches [30 cm]
ROPS Weight2,900 lbs [1315 kg]
Width52.4 inches*Minimum [133 cm]
Rear tread40.6/45.3/48.9/53.1/56.6 inches [103/115/124/134/143 cm]
Industrial front25x8.5-14
Ag front7-14
Lawn/turf front25x10.5LL-15
Lawn/turf rear41x14-20
Ag rear11.2-24
Industrial rear15-19.5
Lawn/turf rear41x18LL-16.1
Lawn/turf front27x8.5-15
Industrial rear43x16-20
Industrial front27x8.5-15

Engine Specifications of John Deere, 3720

Get the specifications for the engine and if different options are available.

Yanmar 3TNV84HT
Liquid-cooled
Turbocharged diesel
3-cylinder
Coolant capacity5.6 qts [5.3 L]
Fuel systemDirect injection
Compression18.5:1
Torque101.1 lb-ft [137.1 Nm]
Rated RPM2600
Displacement91.5 ci [1.5 L]
Power44 hp [32.8 kW]
Bore/Stroke3.3x3.54 inches [84 x 90 mm]
Oil capacity6 qts [5.7 L]
Starter volts12
Torque RPM1560

Transmission Information of John Deere, 3720Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Controlled by two foot pedals and range shift lever. Tractor must be stopped before shifting ranges. Cruise control standard. SpeedMatch allows maximum speed to be limited. MotionMatch allows acceleration rate to be set. LoadMatch allows engine RPMs to be set, tractor will adjust speed to maintain RPMs.
TransmissionSauer-Danfoss eHydro
TypeHydrostatic
GearsInfinite forward and reverse (3-range)

Transmission variants 2

AutoHST provides an automobile-style control to the eHydro transmission. A single foot pedal controls engine RPMs and transmission speed, with a column-mounted shifter to select forward, neutral, or reverse.
TransmissionEHydro AutoHST
TypeHydrostatic
GearsInfinite forward and reverse (3-range)

Mechanical Specs of John Deere, 3720Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Two-post foldable ROPS. Cab optional.
Wet disc brakes
SteeringPower

Power Information of John Deere, 3720Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Mid PTO Type2100
Rear PTO Type540
Mid PTOOptional

Hydraulics Specifications of John Deere, 3720

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Total flow13.9 gpm [52.6 lpm]
Pump flow8.6 gpm [32.6 lpm]
Capacity6.8 gal [25.7 L]
Valves5

Three-Point Hitch of John Deere, 3720

Hitch category and rear/front lift capacity.

Rear TypeI
Rear lift (at ends)2,530 lbs [1147 kg]

Electrical System of John Deere, 3720

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA500
ROPS Charging amps40
Cab Charging amps75

Frequently asked questions

How much horsepower does the John Deere 3720 have?

The John Deere 3720 delivers 44 HP.

What years was the John Deere 3720 produced?

The John Deere 3720 was produced in 2005-2013.

What engine does the John Deere 3720 have?

The John Deere 3720 is powered by a Turbocharged diesel, 3-cylinder engine.

What transmission does the John Deere 3720 use?

The John Deere 3720 uses a Sauer-Danfoss eHydro transmission.

How much does the John Deere 3720 weigh?

The John Deere 3720 weighs 3,570 lbs [1619 kg].

Is the John Deere 3720 4WD?

The John Deere 3720 is available in 4WD.

Compare the John Deere 3720 with another model