John Deere 1140 tractor

John Deere 1140

Power

55 hp

Production

1980-1987

Engine

Diesel, 3-cylinder

Transmission

Collar shift

Weight

5300 lbs [2404 kg]

Drive

2WD/4WD

From the same series:

1040

Introduction

Production Information of John Deere, 1140

The production information of the tractor (1140) includes details about its manufacturing.

Utility tractor
Built in Mannheim, Baden-Württemberg, Germany
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 1140

This section sums up the dimension and tires information of the tractor.

Ground clearance24.5 inches [62 cm]
Wheelbase80.7 inches [204 cm]
Height (exhaust)104 inches [264 cm]
Height (cab)97.3 inches [247 cm]
Length138 inches [350 cm]
Front tread49.6 to 81 inches [125 to 205 cm]
Shipping weight5300 lbs [2404 kg]
Width71.3 inches*Minimum [181 cm]
Rear tread59.1 to 78.7 inches [150 to 199 cm]
Standard tires (ag)Front: 7.50-16. Rear: 13.6-36 (2WD)
Front: 11.2-24. Rear: 13.6-36 (4WD)

Engine Specifications of John Deere, 1140

Get the specifications for the engine and if different options are available.

John Deere
Liquid-cooled
Diesel
3-cylinder
Coolant capacity16.4 qts [15.5 L]
Compression16.8:1
Rated RPM2500
Torque RPM1400
Torque136.4 lb-ft [185.0 Nm]
Displacement179 ci [2.9 L]
Power55 hp [41.0 kW]
Bore/Stroke4.19x4.33 inches [106 x 110 mm]
Oil capacity7.4 qts [7.0 L]
Starter power4 hp [3.0 kW]
Starter volts12

Transmission Information of John Deere, 1140Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TypeCollar shift
Gears8 forward and 4 reverse
Oil capacity58.1 qts [55.0 L]

Transmission variants 2

TransmissionHi-Lo
TypeTwo-speed power shift
Gears16 forward and 8 reverse
8-speed collar shift
16-speed two-speed power shift

Mechanical Specs of John Deere, 1140Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Four-post ROPS. Cab optional.
Hydraulic wet disc brakes
SteeringPower

Power Information of John Deere, 1140Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Engine RPM540@2400
ClutchHydraulic disc
Rear PTO Type540 (1.375)

Hydraulics Specifications of John Deere, 1140

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center constant pressure
Pump flow12.4 gpm [46.9 lpm]
Capacity14.5 gal [54.9 L]
Pressure2466 psi [170.0 bar]

Three-Point Hitch of John Deere, 1140

Hitch category and rear/front lift capacity.

Rear TypeII/I
ControlLower-link draft control
Rear lift5291 lbs [2399 kg]

Electrical System of John Deere, 1140

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Batteries2
Charging systemAlternator
Battery AH55
Charging amps55

Frequently asked questions

How much horsepower does the John Deere 1140 have?

The John Deere 1140 delivers 55 HP.

What years was the John Deere 1140 produced?

The John Deere 1140 was produced in 1980-1987.

What engine does the John Deere 1140 have?

The John Deere 1140 is powered by a Diesel, 3-cylinder engine.

What transmission does the John Deere 1140 use?

The John Deere 1140 uses a Collar shift transmission.

How much does the John Deere 1140 weigh?

The John Deere 1140 weighs 5300 lbs [2404 kg].

Is the John Deere 1140 4WD?

The John Deere 1140 is available in 2WD/4WD.

Compare the John Deere 1140 with another model