Introduction
Production Information of John Deere, 1040
The production information of the tractor (1040) includes details about its manufacturing.
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 1040
This section sums up the dimension and tires information of the tractor.
| Front tread | 49.6 to 81 inches [125 to 205 cm] |
|---|---|
| Wheelbase | 80.7 inches [204 cm] |
| Weight | 6107 lbs [2770 kg] |
| Height (cab) | 96.1 inches [244 cm] |
| Length | 138 inches [350 cm] |
| Rear tread | 55.1 to 78.7 inches [139 to 199 cm] |
| Ground clearance | 14.6 inches [37 cm] |
| Width | 71.3 inches [181 cm] |
| Standard tires (ag) | Front: 7.50-16. Rear: 12.4-36 (2WD) |
|---|---|
| Front: 9.50-24. Rear: 12.4-36 (4WD) |
Engine Specifications of John Deere, 1040
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Coolant capacity | 16.4 qts [15.5 L] |
|---|---|
| Power (gross) | 53.6 hp [40.0 kW] |
| Compression | 16.8:1 |
| Torque | 121.7 lb-ft [165.0 Nm] |
| Rated RPM | 2500 |
| Displacement | 179 ci [2.9 L] |
| Power (net) | 49.6 hp [37.0 kW] |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Oil capacity | 7.4 qts [7.0 L] |
| Starter volts | 12 |
| Torque RPM | 1400 |
Transmission Information of John Deere, 1040Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Collar shift |
|---|---|
| Gears | 8 forward and 4 reverse |
| Oil capacity | 58.1 qts [55.0 L] |
Transmission variants 2
| Transmission | Hi-Lo |
|---|---|
| Gears | 16 forward and 8 reverse |
| 8-speed collar shift |
| 16-speed |
Mechanical Specs of John Deere, 1040Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Cab optional. |
| Wet disc brakes |
| Final drives | Planetary |
|---|---|
| Steering | Power |
Power Information of John Deere, 1040Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2400 |
Hydraulics Specifications of John Deere, 1040
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 14.5 gal [54.9 L] |
|---|---|
| Pump flow | 8.2 gpm [31.0 lpm] |
Three-Point Hitch of John Deere, 1040
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 4047 lbs [1835 kg] |
Electrical System of John Deere, 1040
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Batteries | 2 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the John Deere 1040 have?
The John Deere 1040 delivers 53 HP.
What years was the John Deere 1040 produced?
The John Deere 1040 was produced in 1980-1987.
What engine does the John Deere 1040 have?
The John Deere 1040 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 1040 use?
The John Deere 1040 uses a Collar shift transmission.
How much does the John Deere 1040 weigh?
The John Deere 1040 weighs 6107 lbs [2770 kg].
Is the John Deere 1040 4WD?
The John Deere 1040 is available in 2WD/4WD.