Introduction
Production Information of John Deere, 5210
The production information of the tractor (5210) includes details about its manufacturing.
| Original price was $21,795 in 2001 |
| Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5210
This section sums up the dimension and tires information of the tractor.
| Rear tread | 55.8 to 75.6 inches [141 to 192 cm] |
|---|---|
| Wheelbase | 80.7 inches [204 cm] |
| 2WD Clearance (front axle) | 19.5 inches [49 cm] |
| Width | 65.4 inches [166 cm] |
| 2WD Length | 122.6 inches [311 cm] |
| 4WD Clearance (drawbar) | 14.9 inches [37 cm] |
| 4WD Clearance (front axle) | 13.4 inches [34 cm] |
| 4WD Length | 125.9 inches [319 cm] |
| 4WD Front tread | 51.9 to 78 inches [131 to 198 cm] |
| 2WD Front tread | 56.5 to 76.2 inches [143 to 193 cm] |
| 2WD Clearance (drawbar) | 15.8 inches [40 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 13.6-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8.3-24. Rear: 13.6-28 |
Engine Specifications of John Deere, 5210
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Coolant capacity | 10 qts [9.5 L] |
|---|---|
| Starter volts | 12 |
| Compression | 17.8:1 |
| Coolant change | 2000 h |
| Idle RPM | 825-2600 |
| Operating RPM | 1600-2400 |
| Rated RPM | 2400 |
| Displacement | 179 ci [2.9 L] |
| Power | 53 hp [39.5 kW] |
| Oil capacity | 9 qts [8.5 L] |
| Oil change | 100 h |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Firing order | 1-2-3 |
| Torque RPM | 1400 |
| Torque | 119.5 lb-ft [162.0 Nm] |
Transmission Information of John Deere, 5210Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The Collar Shift transmission is controlled with two levers and the foot clutch. The right-hand lever selects one of three speeds (1-3) or reverse (R). The left-hand lever selects one of three ranges (A-C). The tractor must be stopped, and clutch used, to shift either speed or range. |
| Transmission | CollarShift |
|---|---|
| Oil capacity | 40 qts [37.9 L] |
| Clutch | Dry disc |
| Type | Unsynchronized gear |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
| Three speeds (1-3) plus reverse (R) in three ranges (A-C). Synchronized shifting, using the clutch, between the three forward speeds and reverse. Tractor must be stopped, and clutch used, to shift range. |
| Transmission | SyncShuttle |
|---|---|
| Oil capacity | 40 qts [37.9 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
Transmission variants 3
| Four speeds (1-4) in three ranges (A-C) with forward-reverse shuttle lever. Direction changes may be done while moving using the left-hand shuttle lever. Speed changes are synchronized using the clutch. Tractor must be stopped, and clutch used, to shift ranges. At tractor start-up, clutch pedal must be cycled once before tractor will move. |
| Transmission | PowrReverser |
|---|---|
| Oil capacity | 46 qts [43.5 L] |
| Clutch | Wet disc |
| Type | Power shuttle |
| Gears | 12 forward and reverse |
| 9-speed unsynchronized gear |
| 9-speed partially synchronized |
| 12-speed power shuttle |
Mechanical Specs of John Deere, 5210Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. Cab optional. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of John Deere, 5210Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| 540/540E *540E not available with collar shift transmission |
Hydraulics Specifications of John Deere, 5210
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1955 psi [134.8 bar] |
|---|---|
| Type | Open center |
| Total flow | 18.2 gpm [68.9 lpm] |
| Pump flow | 11.4 gpm [43.1 lpm] |
| Pressure | 2855 psi [196.9 bar] |
| Steering flow | 6.8 gpm [25.7 lpm] |
| Valves | 5 |
Three-Point Hitch of John Deere, 5210
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 3374 lbs [1530 kg] |
Electrical System of John Deere, 5210
Battery voltage, charging system and ground.
| ROPS Battery Group | 28H |
|---|---|
| Ground | Negative |
| Battery CCA | 700 |
| Cab Charging amps | 60 |
| Charging system | Alternator |
| Cab Battery Group | 31 |
| Battery volts | 12 |
| ROPS Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 5210 have?
The John Deere 5210 delivers 53 HP.
What years was the John Deere 5210 produced?
The John Deere 5210 was produced in 1998-2001.
What transmission does the John Deere 5210 use?
The John Deere 5210 uses a CollarShift transmission.
Is the John Deere 5210 4WD?
The John Deere 5210 is available in 2WD/4WD.