John Deere 5200 tractor

John Deere 5200

Power

45 hp

Production

1992-1997

Engine

Diesel, 3-cylinder

Transmission

John Deere Collar Shift

Drive

2WD/4WD

From the same series:

5300

Introduction

John Deere 5200 Utility Tractor

The John Deere 5200 is a utility tractor produced between 1992 and 1997 in Augusta, Georgia, USA. Designed for versatility in agricultural operations, it was available in both two-wheel and four-wheel drive configurations.

Engine and Performance

The tractor is powered by a 2.9-liter, 3-cylinder liquid-cooled diesel engine. It features indirect injection and a dual dry element air cleaner. The engine delivers a gross power output of 45.6 hp (34.0 kW) and operates within a rated speed of 2400 RPM.

Transmission and Drivetrain

The 5200 offers three distinct transmission options: a 9-speed collar shift, a 9-speed partially synchronized gear system, and a 12-speed TSS power shuttle. These transmissions allow for varied operational requirements, with the power shuttle version providing a left-hand reverser lever for enhanced maneuverability.

Hydraulics and Hitch

The hydraulic system is of the open-center type, providing a total flow of 18.2 gpm (68.9 lpm), with 11.4 gpm dedicated to pump flow and 6.8 gpm to steering. The rear hitch is a Category II/I type, featuring position control and top-link draft sensing, capable of lifting 3,374 lbs (1,530 kg) at 24 inches behind the lift point.

Operator Environment and Mechanicals

Standard operator safety is provided by a two-post folding ROPS, with an air-conditioned cab available as an option. Mechanical features include power steering and hydraulic wet disc brakes for consistent performance. The rear differential lock is mechanically operated to assist with traction in challenging terrain.

Conclusion

The John Deere 5200 is a robust utility tractor suited for general agricultural tasks, offering a range of transmission options and hydraulic capabilities that allow it to be configured for diverse field and farmstead applications.

Videos

Production Information of John Deere, 5200

  • Original price was $20,000 in 1997
  • Utility tractor
  • Built in Augusta, Georgia, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 5200

4WD Front tread51.9 to 78 inches [131 to 198 cm]
Wheelbase80.7 inches [204 cm]
2WD Clearance (front axle)18 inches [45 cm]
Width69.4 inches [176 cm]
2WD Length121.5 inches [308 cm]
4WD Clearance (drawbar)14.7 inches [37 cm]
4WD Clearance (front axle)15.8 inches [40 cm]
4WD Length125.9 inches [319 cm]
Rear tread51.7 to 79.7 inches [131 to 202 cm]
2WD Front tread56.5 to 76.2 inches [143 to 193 cm]
Flange rear axle57.3 inch length [1455 mm]
2WD Clearance (drawbar)15 inches [38 cm]

Minimum width.

4WD Lawn/turf front12LL-16
2WD Standard tires (ag)Front: 6.50-16. Rear: 13.6-28
Lawn/turf rear21.5L-16.1
4WD Lawn/turf front9.5-16
4WD Standard tires (ag)Front: 8.3-24. Rear: 13.6-28
Lawn/turf rear22.5LL-16.1
2WD Lawn/turf front27/9.5-15
2WD Lawn/turf front27/9.5-15

Engine Specifications of John Deere, 5200

  • John Deere
  • Liquid-cooled
  • 3-cylinder
  • Diesel
Coolant capacity10 qts [9.5 L]
Oil capacity9 qts [8.5 L]
Fuel systemIndirect injection
Compression17.8:1
Pre-heatingThermostart
Displacement179 ci [2.9 L]
Power (gross)45.6 hp [34.0 kW]
Air cleanerDual dry elements
Bore/Stroke4.19x4.33 inches [106 x 110 mm]
Starter volts12
Operating RPM1600-2400
Rated RPM2400

Transmission Information of John Deere, 5200

Transmission variants 1

  • Three gears (1-3), plus reverse, with three ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range.
TransmissionJohn Deere Collar Shift
ClutchDry disc
TypeUnsynchronized gear
Gears9 forward and 3 reverse

Transmission variants 2

  • Three gears (1-3), plus reverse, in three ranges (A-C). Gear shifts are synchronized using the clutch. Tractor must be stopped to shift range.
TransmissionJohn Deere Top-Shaft Synchronized
ClutchDry disc
TypePartially synchronized
Gears9 forward and 3 reverse

Transmission variants 3

  • Four gears (1-4) in three ranges (A-C) with left-hand reverser lever.
TransmissionJohn Deere TSS Reverser
ClutchWet disc
TypePower shuttle
Gears12 forward and reverse
  • 9-speed unsynchronized gear
  • 9-speed partially synchronized
  • 12-speed power shuttle

Mechanical Specs of John Deere, 5200

  • Two- or four-wheel drive
  • Two-post folding ROPS. Cab optional with air-conditioning.
  • Hydraulic wet disc brakes
  • Power steering
Differential lockMechanical rear

Power Information of John Deere, 5200

Rear PTOIndependent
Rear PTO Type540
Engine RPM540@2400

Hydraulics Specifications of John Deere, 5200

Steering flow6.8 gpm [25.7 lpm]
TypeOpen center
Pump flow11.4 gpm [43.1 lpm]
Valves1 to 3
Capacity10 gal [37.9 L]
Total flow18.2 gpm [68.9 lpm]
Pressure2750 psi [189.6 bar]

Three-Point Hitch of John Deere, 5200

Rear TypeII/I
ControlPosition control with top-link draft sensing
Rear lift (at 24"/610mm)3374 lbs [1530 kg]

Electrical System of John Deere, 5200

GroundNegative
Battery volts12
Cab Charging amps60
Charging systemAlternator
ROPS Charging amps40

Where it sits

With 45 HP, the John Deere 5200 sits just below 5210 (53 HP) in John Deere's range. Its power puts it in the 27th percentile of 1990s models in our database (2097 machines).

Frequently asked questions

How much horsepower does the John Deere 5200 have?

The John Deere 5200 delivers 45 HP.

What years was the John Deere 5200 produced?

The John Deere 5200 was produced in 1992-1997.

What engine does the John Deere 5200 have?

The John Deere 5200 is powered by a Diesel, 3-cylinder engine.

What transmission does the John Deere 5200 use?

The John Deere 5200 uses a John Deere Collar Shift transmission.

Is the John Deere 5200 4WD?

The John Deere 5200 is available in 2WD/4WD.

Compare the John Deere 5200 with another model