Introduction
Production Information of John Deere, 5045E
The production information of the tractor (5045E) includes details about its manufacturing.
| Utility tractor |
| Built in Pune, Maharashtra, India |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5045E
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 80.7 inches [204 cm] |
|---|---|
| Clearance (front axle) | 13.4 inches [34 cm] |
| Shipping weight | 5,070 lbs [2299 kg] |
| Length | 137.8 inches [350 cm] |
| Front axle | Flange |
| Width | 57.3 inches (axle flange) [145 cm] |
| Industrial front | 12.5/80-18 |
|---|---|
| Ag front | 8.3-24 |
| Lawn/turf front | 9.5-16 |
| 16.9-28 | |
| Ag rear | 13.6-28 |
| Industrial rear | 16.9-24 |
| Lawn/turf rear | 21.5L-16.1 |
| Ag rear | 14.9-28 |
Engine Specifications of John Deere, 5045E
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Coolant capacity | 10 qts [9.5 L] |
|---|---|
| Starter volts | 12 |
| Air cleaner | Two paper elements |
| Intake valve clearance | 0.014 inches [0.356 mm] |
| Idle RPM | 800-2600 |
| Operating RPM | 1700-2400 |
| Rated RPM | 2400 |
| Displacement | 179 ci [2.9 L] |
| Rated Power (gross) | 45 hp [33.6 kW] |
| Oil capacity | 9 qts [8.5 L] |
| Oil change | 100 h |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Firing order | 1-2-3 |
| Exhaust valve clearance | 0.018 inches [0.457 mm] |
| Torque RPM | 1700 |
| Torque | 135.7 lb-ft [184.0 Nm] |
Transmission Information of John Deere, 5045EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models. |
| Transmission | SyncShuttle |
|---|---|
| Oil type | JD Hy-Gard |
| Oil capacity | 41.2 qts [39.0 L] |
| Type | Partially synchronized |
| JD Hy-Gard | |
| Gears | 9 forward and 3 reverse |
Mechanical Specs of John Deere, 5045EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Folding 2-post ROPS |
| Steering | Hydrostatic power |
|---|---|
| Final drives | Planetary |
| Differential lock | Mechanical rear |
Power Information of John Deere, 5045EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Mechanical |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 5045E
Hydraulic system type, pressure, pump flow and valves.
| Total flow | 18.2 gpm [68.9 lpm] |
|---|---|
| Type | Open center |
| Mid valves | 2 |
| Rear valves | 1 or 2 |
| Capacity | 10.3 gal [39.0 L] |
| Steering flow | 6.8 gpm [25.7 lpm] |
| Pump flow | 11.4 gpm [43.1 lpm] |
| Pressure | 2828 psi [195.0 bar] |
| Steering press. | 1958 psi [135.0 bar] |
Three-Point Hitch of John Deere, 5045E
Hitch category and rear/front lift capacity.
| Rear Type | 2 |
|---|---|
| Control | Position and top-link draft control |
| Rear lift (at 24"/610mm) | 3,192 lbs [1447 kg] |
Electrical System of John Deere, 5045E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 623 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 5045E have?
The John Deere 5045E delivers 45 HP.
What years was the John Deere 5045E produced?
The John Deere 5045E was produced in 2008-2022.
What transmission does the John Deere 5045E use?
The John Deere 5045E uses a SyncShuttle transmission.
How much does the John Deere 5045E weigh?
The John Deere 5045E weighs 5,070 lbs [2299 kg].
Is the John Deere 5045E 4WD?
The John Deere 5045E is available in 4WD.