John Deere 1120 tractor

John Deere 1120

Power

53 hp

Production

1967-1975

Engine

Diesel, 3-cylinder

Transmission

Partially synchronized

Drive

2WD

Introduction

Production Information of John Deere, 1120

The production information of the tractor (1120) includes details about its manufacturing.

Utility tractor
Built in Mannheim, Baden-Württemberg, Germany
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 1120

This section sums up the dimension and tires information of the tractor.

Rear tread53.1 to 76.7 inches [134 to 194 cm]
Wheelbase80.7 inches [204 cm]
Height (exhaust)83.7 inches [212 cm]
Height (ROPS)90.9 inches [230 cm]
Length135 inches [342 cm]
Front tread49.6 to 80.7 inches [125 to 204 cm]
Width66.1 inches [167 cm]
14.9/12-30
Ag front7.50-16
Ag rear16.9/14-28
6.50-16
Ag rear12.4/11-36
16.9/14-30
14.9/13-28
Ag front6.00-16
13.6/12-36
12.4/11-32

Engine Specifications of John Deere, 1120

Get the specifications for the engine and if different options are available.

John Deere
Liquid-cooled
Diesel
3-cylinder
Torque RPM1350
Intake valve clearance0.014 inches [0.356 mm]
Torque123 lb-ft [166.8 Nm]
Oil capacity6 qts [5.7 L]
Power (gross)53 hp [39.5 kW]
Firing order1-2-3
Coolant capacity11 qts [10.4 L]
Air cleanerDry
Fuel systemDirect injection
Compression16.7:1
Exhaust valve clearance0.018 inches [0.457 mm]
Displacement164.5 ci [2.7 L]
Power (net)51 hp [38.0 kW]
Bore/Stroke4.02x4.33 inches [102 x 110 mm]
Operating RPM1400-2500
StarterElectric
Starter volts12
Idle RPM650-2650
Rated RPM2500

Transmission Information of John Deere, 1120Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four synchronized gear in two ranges, plus reverse range. Tractor must be stopped, and clutch used, to shift range.
TypePartially synchronized
Gears8 forward and 4 reverse
ClutchDry disc

Transmission variants 2

Four gears (1-4) in two ranges (I/II) plus reverse (R) range. Left-hand power shift lever on dash.
TypeTwo-speed power shift
Gears16 forward and 8 reverse
8-speed partially synchronized
16-speed two-speed power shift

Mechanical Specs of John Deere, 1120Y

This section summarizes all mechanical information such as the brake system and other specifications.

Open operator station. Two-post fixed ROPS available.
Two-wheel drive
Hydraulic wet disc brakes
SteeringPower OptOptional
SteeringManual
Final drivesPlanetary
Differential lockMechanical rear

Power Information of John Deere, 1120Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Front PTO Type1000
Rear PTOLive
1000@2100
Engine RPM540@2100
Independent OptOptional
Front PTOIndependent OptOptional
Rear PTO Type540/1000 (1.375)

Hydraulics Specifications of John Deere, 1120

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center
Pump flow12.9 gpm [48.8 lpm]
Capacity10 gal [37.9 L]
Pressure2250 psi [155.1 bar]

Three-Point Hitch of John Deere, 1120

Hitch category and rear/front lift capacity.

Rear TypeII/I
ControlPosition and draft control
Rear lift3570 lbs [1619 kg]

Electrical System of John Deere, 1120

Battery voltage, charging system and ground.

Batteries2
GroundNegative
55
33
Charging systemAlternator
Battery volts12
Charging volts14
Charging amps28

Frequently asked questions

How much horsepower does the John Deere 1120 have?

The John Deere 1120 delivers 53 HP.

What years was the John Deere 1120 produced?

The John Deere 1120 was produced in 1967-1975.

What engine does the John Deere 1120 have?

The John Deere 1120 is powered by a Diesel, 3-cylinder engine.

What transmission does the John Deere 1120 use?

The John Deere 1120 uses a Partially synchronized transmission.

Is the John Deere 1120 4WD?

The John Deere 1120 is available in 2WD.

Compare the John Deere 1120 with another model