Introduction
Production Information of John Deere, 2355
The production information of the tractor (2355) includes details about its manufacturing.
| Original price was $21,000 in 1992 |
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2355
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 89.7 inches [227 cm] |
|---|
| Ag front | 6.50-16 |
|---|---|
| Ag rear | 16.9-28 |
Engine Specifications of John Deere, 2355
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 239 ci [3.9 L] |
| Compression | 17.8:1 |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Coolant capacity | 13.7 qts [13.0 L] |
| Oil capacity | 10.6 qts [10.0 L] |
| 2300 (TSS) | |
| Rated RPM | 2500 (CST) |
| Power | 64 hp [47.7 kW] |
Transmission Information of John Deere, 2355Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears with two forward and one reverse range. |
| Transmission | John Deere Collar Shift (CST) |
|---|---|
| Clutch | Dry disc |
| Type | Non-synchronized |
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Four gears (1-4) with two ranges (I-II) and reverse range. Optional creeper range provides 12 forward and 8 reverse speeds. |
| Transmission | John Deere Top-Shaft Synchronized (TSS) |
|---|---|
| Clutch | Dry disc |
| Type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
Transmission variants 3
| Adds a hydraulic high-low power shift to the basic TSS transmission. |
| Transmission | John Deere Hi-Lo Top-Shaft Synchronized (TSS) |
|---|---|
| Clutch | Dry disc |
| Type | Partial power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 4
| Adds a hydraulic reverse to the CST transmission. |
| Transmission | John Deere Collar Shift Reverser |
|---|---|
| Type | Power shuttle |
| Gears | 8 forward and reverse |
| 8-speed non-synchronized |
| 8-speed power shuttle |
| 8-speed partially synchronized |
| 16-speed partial power shift |
Mechanical Specs of John Deere, 2355Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Roll-Gard ROPS. Optional Sound-Gard cab. |
| Differential hydraulic wet disc brakes |
| Steering | Power |
|---|---|
| Hydrostatic power OptOptional |
Power Information of John Deere, 2355Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live *Two-stage clutch |
|---|---|
| 540/1000 (TSS) | |
| Independent OptOptional | |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 2355
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| 23 gpmOptOptional [87.1 lpm] | |
| Total flow | 13 gpm [49.2 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Valves | 1 to 3 |
Three-Point Hitch of John Deere, 2355
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Front lift | 3372 lbs [1529 kg] |
| Rear lift | 3269 lbs [1482 kg] |
| Front Hitch | II OptOptional |
Electrical System of John Deere, 2355
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 400 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the John Deere 2355 have?
The John Deere 2355 delivers 64 HP.
What years was the John Deere 2355 produced?
The John Deere 2355 was produced in 1987-1992.
What engine does the John Deere 2355 have?
The John Deere 2355 is powered by a Diesel, 4-cylinder engine.
What transmission does the John Deere 2355 use?
The John Deere 2355 uses a John Deere Collar Shift (CST) transmission.
Is the John Deere 2355 4WD?
The John Deere 2355 is available in 2WD/4WD.