Introduction
John Deere 5303 Utility Tractor
The John Deere 5303 is a utility tractor produced between 2003 and 2008 in Pune, India. Designed for general agricultural tasks, this series offers a balance of power and maneuverability suited for various farming operations.
Engine and Performance
The tractor is powered by a 2.9-liter, three-cylinder liquid-cooled engine. It delivers 64 horsepower (47.7 kW) at a rated speed of 2400 RPM. The engine features a dry-type air cleaner and a firing order of 1-2-3, with maintenance intervals set at 100 hours for oil changes and 2000 hours for coolant service.
Transmission and Drivetrain
The 5303 is available with two transmission options: the SyncReverser and the SyncShuttle. Both configurations provide 9 forward and 3 reverse gears. The SyncReverser is standard on 2WD models and requires the tractor to be stopped before changing speed or range. The SyncShuttle, available on 4WD models, allows for shifting speeds while in motion, though range changes still require a full stop. Both systems utilize a dry disc clutch.
Hydraulics and PTO
The hydraulic system utilizes an open-center design with a total flow capacity of 16.3 gpm (61.7 lpm), including a 9.5 gpm pump flow and a 6.8 gpm steering flow. The system operates at a pressure of 2800 psi. The independent rear PTO operates at 540 RPM at 2400 engine RPM, and the three-point hitch (Category II/I) provides a rear lift capacity of 3,591 lbs (1628 kg).
Operator Environment and Mechanical Features
The machine is equipped with power steering and differential wet disc brakes to assist with control. It features a foldable two-post Roll-Over Protective Structure (ROPS) for operator safety. The tractor supports both 2WD and 4WD configurations, with front tread adjustability ranging from 56.9 to 81.9 inches.
Conclusion
The John Deere 5303 is a standard utility tractor designed for reliability and operational flexibility. Its combination of a 64 hp engine, multiple transmission choices, and significant hydraulic capacity makes it suitable for general field work and light to medium-duty implement operation.
Production Information of John Deere, 5303
- Original price was $18,800 in 2007
- Utility tractor
- Built in Pune, Maharashtra, India
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5303
| Wheelbase | 80.7 inches [204 cm] |
|---|---|
| Rear tread | 55.8 to 71.7 inches [141 to 182 cm] |
| 2WD Clearance (front axle) | 18 inches [45 cm] |
| Front tread | 56.9 to 81.9 inches [144 to 208 cm] |
| 2WD Ag front | 7.5-16 |
|---|---|
| 4WD Ag front | 9.5-24 |
| Ag rear | 16.9-28 |
Engine Specifications of John Deere, 5303
- Liquid-cooled
| Intake valve clearance | 0.014 inches [0.356 mm] |
|---|---|
| Coolant change | 2000 h |
| Air cleaner | Dry |
| Exhaust valve clearance | 0.018 inches [0.457 mm] |
| Idle RPM | 800-2650 |
| Operating RPM | 1400-2400 |
| Rated RPM | 2400 |
| Displacement | 179 ci [2.9 L] |
| Power | 64 hp [47.7 kW] |
| Oil capacity | 9 qts [8.5 L] |
| Oil change | 100 h |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Coolant capacity | 10 qts [9.5 L] |
| Starter volts | 12 |
| Firing order | 1-2-3 |
Transmission Information of John Deere, 5303
Transmission variants 1
- Three speeds (1-3) plus reverse (R) in three ranges (A-C). Tractor must be stopped, and clutch used, before shifting speed or range. Standard on 2WD models.
| Transmission | SyncReverser |
|---|---|
| Oil capacity | 40 qts [37.9 L] |
| Gears | 9 forward and 3 reverse |
| Clutch | Dry disc |
Transmission variants 2
- The SyncShuttle (also identified as Top Shaft Synchronizer or TSS) is available on the 4WD models. Three speeds (1-3) plus reverse (R) in three ranges (A-C). Shifting speeds may be done while in motion, using the clutch. The tractor must be stopped to shift ranges.
| Transmission | SyncShuttle |
|---|---|
| Oil capacity | 40 qts [37.9 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
- 9-speed
- 9-speed partially synchronized
Mechanical Specs of John Deere, 5303
- Two- or four-wheel drive
- Foldable two-post ROPS.
- Power steering
- Differential wet disc brakes
Power Information of John Deere, 5303
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| Engine RPM | 540@2400 |
Hydraulics Specifications of John Deere, 5303
| Steering flow | 6.8 gpm [25.7 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 9.5 gpm [36.0 lpm] |
| Valves | 1 or 2 |
| Capacity | 10 gal [37.9 L] |
| Total flow | 16.3 gpm [61.7 lpm] |
| Pressure | 2800 psi [193.1 bar] |
Three-Point Hitch of John Deere, 5303
| Rear Type | II/I |
|---|---|
| Rear lift | 3,591 lbs [1628 kg] |
Electrical System of John Deere, 5303
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 623 |
| Charging system | Alternator |
| Charging amps | 40 |
Where it sits
With 64 HP, the John Deere 5303 sits between 5203 (56 HP) and 5403 (74 HP) in John Deere's range. Its power puts it in the 42th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 5303 have?
The John Deere 5303 delivers 64 HP.
What years was the John Deere 5303 produced?
The John Deere 5303 was produced in 2003-2008.
What transmission does the John Deere 5303 use?
The John Deere 5303 uses a SyncReverser transmission.
Is the John Deere 5303 4WD?
The John Deere 5303 is available in 2WD/4WD.