Introduction
Production Information of John Deere, 5050D
The production information of the tractor (5050D) includes details about its manufacturing.
| Built in Pune, Maharashtra, India |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5050D
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 76.8 inches [195 cm] |
|---|---|
| Weight | 4034 lbs [1829 kg] |
| Height (exhaust) | 87.4 inches [221 cm] |
| Length | 132.7 inches [337 cm] |
| Ground clearance | 17.3 inches [43 cm] |
| Width | 71.1 inches [180 cm] |
| Ag front | 6.0x16 |
|---|---|
| 13.6x28 | |
| 7.5x16 | |
| Ag rear | 14.9x28 |
Engine Specifications of John Deere, 5050D
Get the specifications for the engine and if different options are available.
| John Deere 3029T |
| The turbocharged 3029T engine was first advertised for the Deere 5050D in 2015. |
| Turbocharged |
| 3-cylinder |
| Starter power | 3.4 hp [2.5 kW] |
|---|---|
| Starter volts | 12 |
| Compression | 18.5:1 |
| Oil capacity | 9 qts [8.5 L] |
| Torque | 141.6 lb-ft [192.0 Nm] |
| Torque RPM | 1200 |
| Rated RPM | 2300 |
| Displacement | 179 ci [2.9 L] |
| Power | 50 hp [37.3 kW] |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Firing order | 1-2-3 |
| Torque RPM | 1600 |
| Firing order | 1-2-3 |
Transmission Information of John Deere, 5050DY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (A/B) plus reverse (R) range. Tractor must be stopped, and clutch used, to shift gear or range. |
| Type | Collar shift gear |
|---|---|
| Gears | 8 forward and 4 reverse |
| Oil capacity | 37 qts [35.0 L] |
Mechanical Specs of John Deere, 5050DY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. ROPS optional. |
| Power steering |
| Mechanical wet disc brakes |
Power Information of John Deere, 5050DY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Engine RPM | 540@2200 |
| Live *Optional, with two-stage clutch. | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 5050D
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 6.6 gpm [25.0 lpm] |
| Capacity | 9.2 gal [34.8 L] |
| Pump flow | 6.6 gpm [25.0 lpm] |
Three-Point Hitch of John Deere, 5050D
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at ends) | 3086 lbs [1399 kg] |
Electrical System of John Deere, 5050D
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 88 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 5050D have?
The John Deere 5050D delivers 50 HP.
What years was the John Deere 5050D produced?
The John Deere 5050D was produced in 2012-2022.
What engine does the John Deere 5050D have?
The John Deere 5050D is powered by a 3-cylinder engine.
What transmission does the John Deere 5050D use?
The John Deere 5050D uses a Collar shift gear transmission.
How much does the John Deere 5050D weigh?
The John Deere 5050D weighs 4034 lbs [1829 kg].
Is the John Deere 5050D 4WD?
The John Deere 5050D is available in 2WD.