Introduction
Production Information of John Deere, 2032R
The production information of the tractor (2032R) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|---|
| $19,339 (2014 ) | |
| Original price | $18,595 (2013 ) |
Dimension and Tires Information of John Deere, 2032R
This section sums up the dimension and tires information of the tractor.
| Height (Folded ROPS) | 67.5 inches [171 cm] |
|---|---|
| Wheelbase | 65.2 inches [165 cm] |
| Height (hood) | 53.3 inches [135 cm] |
| 55.6 inches [141 cm] | |
| Length | 108.9 inches [276 cm] |
| Clearance (front axle) | 13 inches [33 cm] |
| Height (ROPS) | 89.7 inches [227 cm] |
| Width | 47.1 inches (min) [119 cm] |
| Front tread | 32.7 inches [83 cm] |
| Front axle | Flange |
| Lawn/turf front | 24x8.5-14 |
|---|---|
| Industrial rear | 14-17.5 |
| Lawn/turf rear | 36x14.00-15 |
| Industrial front | 23x8.5-12 |
Engine Specifications of John Deere, 2032R
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Coolant capacity | 4.2 qts [4.0 L] |
|---|---|
| Starter volts | 12 |
| Rated Power (gross) | 31.7 hp [23.6 kW] |
| Oil change | 200 h |
| Compression | 19.1:1 |
| Air cleaner | Dual stage dry |
| Displacement | 100 ci [1.6 L] |
| Oil capacity | 3.6 qts [3.4 L] |
| Power | 32 hp [23.9 kW] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.465x3.543 inches [88 x 90 mm] |
| Starter | Electric |
| Operating RPM | 1000-2650 |
| Rated RPM | 2500 |
Transmission Information of John Deere, 2032RY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Deere Hy-Gard | |
| Oil type | Deere Hy-Gard |
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 15.6 qts [14.8 L] |
Mechanical Specs of John Deere, 2032RY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post folding ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Standard |
Power Information of John Deere, 2032RY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2100 |
| Mid PTO | Independent |
| Clutch | Wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 2032R
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 5.5 gpm [20.8 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 5.0 gpm [18.9 lpm] |
| Mid valves | 2 |
| Capacity | 3.9 gal [14.8 L] |
| Total flow | 10.5 gpm [39.7 lpm] |
| Pressure | 2421 psi [166.9 bar] |
Three-Point Hitch of John Deere, 2032R
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1250 lbs [567 kg] |
| Control | Position control |
| Rear lift (at ends) | 1433 lbs [650 kg] |
Electrical System of John Deere, 2032R
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 500 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 2032R have?
The John Deere 2032R delivers 32 HP.
What years was the John Deere 2032R produced?
The John Deere 2032R was produced in 2013+.
What transmission does the John Deere 2032R use?
The John Deere 2032R uses a Hydrostatic transmission.
Is the John Deere 2032R 4WD?
The John Deere 2032R is available in 4WD.