Introduction
Production Information of John Deere, 3203
The production information of the tractor (3203) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 3203
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 68 inches [172 cm] |
|---|---|
| Height (hood) | 54.7 inches [138 cm] |
| 69.1 inches*Maximum [175 cm] | |
| Length | 120.2 inches [305 cm] |
| Height (ROPS) | 83 inches [210 cm] |
| Width | 53.1 inches*Minimum width [134 cm] |
| Ag front | 25x8.50-14 |
|---|---|
| Ag rear | 15-19.5 |
Engine Specifications of John Deere, 3203
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Starter volts | 12 |
|---|---|
| Torque RPM | 1680 |
| Rated Power (gross) | 32 hp [23.9 kW] |
| Starter power | 1.6 hp [1.2 kW] |
| Compression | 19:1 |
| Rated RPM | 2800 |
| Air cleaner | Dry with safety element |
| Displacement | 91.5 ci [1.5 L] |
| Emissions | Tier II |
| Oil capacity | 4.5 qts [4.3 L] |
| Oil change | 200 h |
| Bore/Stroke | 3.3x3.54 inches [84 x 90 mm] |
| Torque | 73.8 lb-ft [100.1 Nm] |
| Coolant capacity | 5.6 qts [5.3 L] |
| Operating RPM | 950-2975 |
| Idle RPM | 950-2975 |
Transmission Information of John Deere, 3203Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of John Deere, 3203Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical |
|---|
Power Information of John Deere, 3203Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2400 |
| Clutch | Wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 3203
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 5.7 gpm [21.6 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 7.6 gpm [28.8 lpm] |
| Valves | 2 |
| Capacity | 6.8 gal [25.7 L] |
| Steering press. | 1500 psi [103.4 bar] |
| Total flow | 13.3 gpm [50.3 lpm] |
| Pressure | 2150 psi [148.2 bar] |
Three-Point Hitch of John Deere, 3203
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1868 lbs [847 kg] |
| Control | Position control |
| Rear lift (at ends) | 2149 lbs [974 kg] |
Electrical System of John Deere, 3203
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery Group | 22NF |
| Battery volts | 12 |
| Charging amps | 75 |
| Battery CCA | 500 |
Frequently asked questions
How much horsepower does the John Deere 3203 have?
The John Deere 3203 delivers 32 HP.
What years was the John Deere 3203 produced?
The John Deere 3203 was produced in 2006-2008.
What transmission does the John Deere 3203 use?
The John Deere 3203 uses a Hydrostatic transmission.
Is the John Deere 3203 4WD?
The John Deere 3203 is available in 4WD.