Introduction
Production Information of John Deere, 2440
The production information of the tractor (2440) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | John Deere |
|---|---|
| Mannheim, Baden-Württemberg, Germany | |
| Factories | Dubuque, Iowa, USA |
Dimension and Tires Information of John Deere, 2440
This section sums up the dimension and tires information of the tractor.
| Rear tread | 50 to 96 inches [127 to 243 cm (rack-and-pinion)] |
|---|---|
| Wheelbase | 85.75 inches (straight axle) [217 cm] |
| Height | 61.3 inches [155 cm] |
| Width | 69.5 inches [176 cm] |
| 79.5 inches (swept axle) [201 cm] | |
| Clearance (front axle) | 25.4 inches [64 cm] |
| Height (exhaust) | 101.7 inches [258 cm] |
| Length | 139.5 inches [354 cm] |
| Rear tread | 52 to 80 inches [132 to 203 cm (power-adjust)] |
| Front tread | 49 to 79 inches [124 to 200 cm (swept)] |
| Front tread | 60 to 88 inches [152 to 223 cm (straight)] |
| Shipping weight | 4,750 lbs [2154 kg] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 16.9-28 |
Engine Specifications of John Deere, 2440
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Image courtesy of Dale Johnson |
| 4-cylinder |
| Rated RPM | 2500 |
|---|---|
| Displacement | 219 ci [3.6 L] |
| Starter volts | 12 |
| Bore/Stroke | 4.02x4.33 inches [102 x 110 mm] |
| Coolant capacity | 12 qts [11.4 L] |
Transmission Information of John Deere, 2440Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (I and II) plus reverse (R) range. |
| Type | Collar shift |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Transmission | Hi-Lo |
|---|---|
| Clutch | Dry disc |
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 3
| Four gears (1-4) in two ranges (I and II) with a left-hand hydraulic shuttle lever. |
| Transmission | Direction Reverser |
|---|---|
| Type | Power shuttle |
| Gears | 8 forward and reverse |
| 8-speed collar shift |
| 16-speed two-speed power shift |
| 8-speed power shuttle |
Mechanical Specs of John Deere, 2440Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Two-post ROPS. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 2440Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
| Engine RPM | 540@2100 |
Hydraulics Specifications of John Deere, 2440
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 9 gpm [34.1 lpm] |
Three-Point Hitch of John Deere, 2440
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|
Electrical System of John Deere, 2440
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the John Deere 2440 have?
The John Deere 2440 delivers 67 hp[P] HP.
What years was the John Deere 2440 produced?
The John Deere 2440 was produced in 1976-1982.
What engine does the John Deere 2440 have?
The John Deere 2440 is powered by a 4-cylinder engine.
What transmission does the John Deere 2440 use?
The John Deere 2440 uses a Collar shift transmission.
How much does the John Deere 2440 weigh?
The John Deere 2440 weighs 4,750 lbs [2154 kg].
Is the John Deere 2440 4WD?
The John Deere 2440 is available in 2WD.