Introduction
Production Information of John Deere, 2640
The production information of the tractor (2640) includes details about its manufacturing.
| Utility tractor |
| Built in Dubuque, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2640
This section sums up the dimension and tires information of the tractor.
| Rear tread | 52 to 97 inches [132 to 246 cm (rack-and-pinion)] |
|---|---|
| Wheelbase | 85.75 inches*Straight axle [217 cm] |
| Height (exhaust) | 101.7 inches [258 cm] |
| Height (hood) | 61.3 inches [155 cm] |
| Length | 139.5 inches [354 cm] |
| Clearance (front axle) | 25.6 inches [65 cm] |
| Operating weight | 5800 lbs [2630 kg] |
| Width | 69.5 inches [176 cm] |
| Front tread | 49 to 79 inches [124 to 200 cm (swept axle)] |
| Front tread | 60 to 88 inches [152 to 223 cm (straight axle)] |
| Ballasted weight | 8430 lbs [3823 kg] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 16.9-28 |
Engine Specifications of John Deere, 2640
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Coolant capacity | 12 qts [11.4 L] |
|---|---|
| Displacement | 276 ci [4.5 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Starter volts | 12 |
| Firing order | 1-3-4-2 |
| Compression | 16.7:1 |
Transmission Information of John Deere, 2640Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (I and II) plus reverse (R) range. |
| Type | Collar shift |
|---|---|
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Transmission | Hi-Lo |
|---|---|
| Clutch | Dry disc |
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 3
| Four gears (1-4) in two ranges (I and II) with a left-hand hydraulic shuttle lever. |
| Transmission | Direction Reverser |
|---|---|
| Type | Power shuttle |
| Gears | 8 forward and reverse |
| 8-speed collar shift |
| 16-speed two-speed power shift |
| 8-speed power shuttle |
Mechanical Specs of John Deere, 2640Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Differential hydraulic wet disc brakes |
| Open operator station. |
| Steering | Mechanical with power assist |
|---|---|
| Final drives | Planetary |
| Differential lock | Mechanical rear |
Power Information of John Deere, 2640Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| 540/1000 |
Hydraulics Specifications of John Deere, 2640
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| 15 gpm [56.8 lpm] | |
| Pump flow | 9 gpm [34.1 lpm] |
| Capacity | 10 gal [37.9 L] |
| Pressure | 2250 psi [155.1 bar] |
Three-Point Hitch of John Deere, 2640
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|
Electrical System of John Deere, 2640
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the John Deere 2640 have?
The John Deere 2640 delivers 77 hp[P] HP.
What years was the John Deere 2640 produced?
The John Deere 2640 was produced in 1976-1982.
What engine does the John Deere 2640 have?
The John Deere 2640 is powered by a Diesel, 4-cylinder engine.
What transmission does the John Deere 2640 use?
The John Deere 2640 uses a Collar shift transmission.
How much does the John Deere 2640 weigh?
The John Deere 2640 weighs 5800 lbs [2630 kg].
Is the John Deere 2640 4WD?
The John Deere 2640 is available in 2WD.