Introduction
Production Information of John Deere, 2855N
The production information of the tractor (2855N) includes details about its manufacturing.
| Orchard/Vineyard tractor |
| Original price was $31,000 in 1992 |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2855N
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 84 inches [213 cm] |
|---|---|
| Weight | 5630 lbs [2553 kg] |
| Width | 65 inches [165 cm] |
| Height | 59 inches [149 cm] |
| Standard tires (ag) | Front: 6.5x16. Rear: 14.9x24 |
|---|
Engine Specifications of John Deere, 2855N
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Compression | 17.8:1 |
|---|---|
| Displacement | 239 ci [3.9 L] |
| Oil capacity | 10.6 qts [10.0 L] |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Coolant capacity | 13.7 qts [13.0 L] |
Transmission Information of John Deere, 2855NY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | John Deere Top Shaft Synchronized |
|---|---|
| Type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Transmission | John Deere TSS Hi-Lo |
|---|---|
| Type | Partial power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 3
| Transmission | John Deere TSS Creeper |
|---|---|
| Gears | 12 forward and 8 reverse |
| 8-speed partially synchronized |
| 16-speed partial power shift |
| 12-speed |
Mechanical Specs of John Deere, 2855NY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Power steering |
| Hydraulic disc brakes |
Power Information of John Deere, 2855NY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Wet disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of John Deere, 2855N
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 21 gpm [79.5 lpm] |
| Pressure | 2320 psi [160.0 bar] |
| Valves | 1 |
Three-Point Hitch of John Deere, 2855N
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift | 3100 lbs [1406 kg] |
Electrical System of John Deere, 2855N
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 400 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the John Deere 2855N have?
The John Deere 2855N delivers 88 hp[P] HP.
What years was the John Deere 2855N produced?
The John Deere 2855N was produced in 1987-1992.
What engine does the John Deere 2855N have?
The John Deere 2855N is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the John Deere 2855N use?
The John Deere 2855N uses a John Deere Top Shaft Synchronized transmission.
How much does the John Deere 2855N weigh?
The John Deere 2855N weighs 5630 lbs [2553 kg].
Is the John Deere 2855N 4WD?
The John Deere 2855N is available in 2WD/4WD.