John Deere 5520 tractor

John Deere 5520

Power

89 hp

Production

2001-2004

Transmission

Collar shift

Drive

2WD/4WD

From the same series:

5420

Introduction

John Deere 5520 Utility Tractor

The John Deere 5520 is a utility tractor produced between 2001 and 2004 at the John Deere facility in Augusta, Georgia, USA. Designed for general agricultural tasks, this model provides an 89-horsepower output and is available in both two-wheel and four-wheel drive configurations.

Engine and Performance

The tractor is powered by a 4.5-liter, liquid-cooled engine producing 89 hp (66.4 kW) at a rated speed of 2400 RPM. It features a compression ratio of 17.0:1 and delivers 227.2 lb-ft (308.1 Nm) of torque at 1500 RPM. The engine requires an oil capacity of 9 quarts (8.5 L) with recommended service intervals of 100 hours.

Transmission Options

The 5520 offers three distinct transmission types to suit different operational needs. The base options include a 9-speed collar shift and a 9-speed partially synchronized transmission, both utilizing a dry disc clutch. The premium PowrReverser transmission provides 12 forward and 12 reverse gears with a wet disc clutch, allowing for clutchless directional changes using a left-hand lever.

Hydraulics and PTO

The open-center hydraulic system operates at a pressure of 2800 psi (193.1 bar) with a total pump flow of 15.9 gpm (60.2 lpm). It supports 2 to 3 valves for implement control. The independent rear PTO offers two speed settings: 540 RPM at 2400 engine RPM and 540E (economy) at 1700 engine RPM, providing versatility for various PTO-driven implements.

Dimensions and Operator Station

The tractor is available with a ROPS structure featuring a straddle-mount or isolated platform, or an optional factory cab. The 4WD model has a wheelbase of 86 inches (218 cm) and 17.7 inches (44 cm) of ground clearance. The rear hitch is a category II/I type with a lift capacity of 3,374 lbs (1530 kg) measured at 24 inches behind the hitch point.

Conclusion

The John Deere 5520 serves as a versatile utility tractor, combining mechanical reliability with multiple transmission configurations. It is well-suited for a variety of medium-duty agricultural operations, offering sufficient hydraulic capacity and power for standard implement management.

Production Information of John Deere, 5520

  • Utility tractor
  • Built in Augusta, Georgia, USA
ManufacturerJohn Deere
Original price$31,000 (2004)

Dimension and Tires Information of John Deere, 5520

ROPS Width74.1 inches [188 cm]
ROPS Wheelbase85.7 inches [217 cm]
2WD cab Length145.5 inches [369 cm]
ROPS Length151.5 inches [384 cm]
2WD cab Wheelbase85 inches [215 cm]
Cab Width77.3 inches [196 cm]
4WD cab Length148 inches [375 cm]
4WD cab Wheelbase86 inches [218 cm]
4WD Ground clearance17.7 inches [44 cm]
2WD Ground clearance18.8 inches [47 cm]
Ag front7.50-16
Ag rear16.9-30

Engine Specifications of John Deere, 5520

  • Liquid-cooled
Coolant capacity11.4 qts [10.8 L]
Starter volts12
Compression17.0:1
Intake valve clearance0.014 inches [0.356 mm]
Idle RPM825-2625
Operating RPM1600-2400
Rated RPM2400
Displacement276 ci [4.5 L]
Power89 hp [66.4 kW]
Oil capacity9 qts [8.5 L]
Oil change100 h
Bore/Stroke4.19x5.00 inches [106 x 127 mm]
Firing order1-3-4-2
Exhaust valve clearance0.018 inches [0.457 mm]
Torque RPM1500
Torque227.2 lb-ft [308.1 Nm]

Transmission Information of John Deere, 5520

Transmission variants 1

  • Three gears (1-3) plus reverse (R) in three ranges (A-C). Tractor must be stopped, and clutch used, to shift gears or range.
ManufacturerJohn Deere
Oil capacity40 qts [37.9 L]
ClutchDry disc
TypeCollar shift
Gears9 forward and 3 reverse

Transmission variants 2

  • Three gears (1-3) plus reverse (R) in three ranges (A-C). Gear and direction shifts are synchronized enabling shifting on the move with the clutch. Tractor must be stopped, and clutch used, to shift ranges.
TransmissionJohn Deere SyncShuttle
Oil capacity40 qts [37.9 L]
ClutchDry disc
TypePartially synchronized
Gears9 forward and 3 reverse

Transmission variants 3

  • Four gears (1-4) in three ranges (A-C) with left-hand directional lever. Forward-reverse directional shifts may be done while moving, without the clutch. Gear shifts are synchronized. Tractor must be stopped to shift ranges.
TransmissionJohn Deere PowrReverser
Oil capacity46 qts [43.5 L]
ClutchWet disc
TypePower shuttle
Gears12 forward and reverse
  • 9-speed collar shift
  • 9-speed partially synchronized
  • 12-speed power shuttle

Mechanical Specs of John Deere, 5520

  • Two- or four-wheel drive
  • ROPS with straddle-mount platform. Optional ROPS with isolated platform (IOOS). Optional cab.
  • Hydraulic wet disc brakes
SteeringHydrostatic power

Power Information of John Deere, 5520

Rear PTOIndependent
Rear PTO(optional)540E@1700
Engine RPM540@2400
Rear PTO Type540
Rear PTO Type(optional)540/540E

Hydraulics Specifications of John Deere, 5520

Steering flow6.6 gpm [25.0 lpm]
TypeOpen center
Valves2 to 3
Pressure2800 psi [193.1 bar]
Capacity10 gal [37.9 L]
Steering press.1900 psi [131.0 bar]
Pump flow15.9 gpm [60.2 lpm]
Pump flow(optional)11.5 gal (PowrReverser) [43.5 L]

Three-Point Hitch of John Deere, 5520

Rear TypeII/I
Rear lift (at 24"/610mm)3,374 lbs [1530 kg]

Electrical System of John Deere, 5520

Battery Group31
GroundNegative
Ground(optional)950 (late)
Battery CCA700 (early)
Charging systemAlternator
Battery volts12
Charging amps65

Where it sits

With 89 HP, the John Deere 5520 sits just above 5420 (81 HP) in John Deere's range. Its power puts it in the 58th percentile of 2000s models in our database (2822 machines).

Frequently asked questions

How much horsepower does the John Deere 5520 have?

The John Deere 5520 delivers 89 HP.

What years was the John Deere 5520 produced?

The John Deere 5520 was produced in 2001-2004.

What transmission does the John Deere 5520 use?

The John Deere 5520 uses a Collar shift transmission.

Is the John Deere 5520 4WD?

The John Deere 5520 is available in 2WD/4WD.

Compare the John Deere 5520 with another model