John Deere 3130 tractor

John Deere 3130

Power

96 hp

Production

1973-1979

Engine

Diesel, 6-cylinder

Transmission

Hi-Lo

Weight

8200 lbs [3719 kg]

Drive

2WD/4WD

From the same series:

3030

Introduction

Production Information of John Deere, 3130

The production information of the tractor (3130) includes details about its manufacturing.

The John Deere 3130 saw a redesign in 1975 at tractor serial number 182150. The front, hood, and decals were changed to a more rounded appearance. The 3130 was sold as the 2840 in the United States.
Utility tractor
Built in Mannheim, Baden-Württemberg, Germany
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 3130

This section sums up the dimension and tires information of the tractor.

Rack-and-pinion rear axle
Flange rear axle
Wheelbase96.9 inches [246 cm]
Weight8200 lbs [3719 kg]
Height103.5 inches [262 cm]
Length157.5 inches [400 cm]
Front tread56.9 to 77 inches [144 to 195 cm]
Width81.8 inches*Minimum width. [207 cm]
Rear tread63 to 99 inches [160 to 251 cm (rack-and-pinion)]
Rear tread63 to 78.7 inches [160 to 199 cm (flange)]
2WD Standard tires (ag)Front: 7.50-18. Rear: 18.4-34
2WD Standard tires (ag)Front: 7.50-20. Rear: 16.9-38
4WD Standard tires (ag)Front: 12.4-24. Rear: 16.9-38

Engine Specifications of John Deere, 3130

Get the specifications for the engine and if different options are available.

John Deere
Liquid-cooled
The 3130 engine could be ordered with an optional turbocharger (TA 3401) as an altitude compensator.
Diesel
6-cylinder
Torque218.3 lb-ft [296.0 Nm]
Operating RPM1300-2500
Oil capacity10.9 qts [10.3 L]
Power (net)87.2 hp [65.0 kW]
Torque RPM1300
Coolant capacity20 qts [18.9 L]
Fuel systemDirect injection
Air cleanerDry
Power (gross)96.5 hp [72.0 kW]
Bore/Stroke4.02x4.33 inches [102 x 110 mm]
Displacement329 ci [5.4 L]
Idle RPM650-2660
StarterElectric
Starter volts12
Rated RPM2500
Compression16.2:1

Transmission Information of John Deere, 3130Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Three gears in two ranges, plus reverse range. Two-speed hydraulic high-low shift.
TransmissionHi-Lo
TypeTwo-speed power shift
Gears12 forward and 6 reverse

Transmission variants 2

Three gears in two ranges, plus reverse range.
TypeSliding gear
Gears6 forward and 3 reverse
12-speed two-speed power shift
6-speed sliding gear

Mechanical Specs of John Deere, 3130Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Wet disc brakes
Power steering
Open operator station. Cab optional.
Final drivesPlanetary
Differential lockMechanical rear

Power Information of John Deere, 3130Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
1000@2200
Rear PTO Type540/1000 (1.375)
Engine RPM540@2200

Hydraulics Specifications of John Deere, 3130

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center
Capacity15 gal [56.8 L]
Pump flow23 gpm [87.1 lpm]

Three-Point Hitch of John Deere, 3130

Hitch category and rear/front lift capacity.

Rear TypeII
ControlPosition control and lower-link draft sensing
Rear lift7452 lbs [3380 kg]

Electrical System of John Deere, 3130

Battery voltage, charging system and ground.

Battery volts12
GroundNegative
Charging volts14
55
Charging systemAlternator
Battery AH88
Batteries2
Charging amps28

Frequently asked questions

How much horsepower does the John Deere 3130 have?

The John Deere 3130 delivers 96 HP.

What years was the John Deere 3130 produced?

The John Deere 3130 was produced in 1973-1979.

What engine does the John Deere 3130 have?

The John Deere 3130 is powered by a Diesel, 6-cylinder engine.

What transmission does the John Deere 3130 use?

The John Deere 3130 uses a Hi-Lo transmission.

How much does the John Deere 3130 weigh?

The John Deere 3130 weighs 8200 lbs [3719 kg].

Is the John Deere 3130 4WD?

The John Deere 3130 is available in 2WD/4WD.

Compare the John Deere 3130 with another model