Introduction
Production Information of John Deere, 2950
The production information of the tractor (2950) includes details about its manufacturing.
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|---|
| $40,456 (1983 Cab 4WD ) | |
| Original price | $28,706 (1983 ROPS 2WD ) |
Dimension and Tires Information of John Deere, 2950
This section sums up the dimension and tires information of the tractor.
| Rack-and-pinion rear axle |
| Ballasted weight | 11045 lbs [5010 kg] |
|---|---|
| 2WD Wheelbase | 100.4 inches [255 cm] |
| Height (cab) | 108.3 inches [275 cm] |
| Height (steering wheel) | 73 inches [185 cm] |
| 4WD Wheelbase | 101.6 inches [258 cm] |
| 2WD Clearance (front axle) | 25.9 inches [65 cm] |
| Operating weight | 10100 lbs (4WD cab) [4581 kg] |
| Length | 153.2 inches [389 cm] |
| 4WD Clearance (front axle) | 18.9 inches [48 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-34 |
|---|---|
| 4WD Optional tires (ag) | Front: 13.6-28. Rear: 18.4-38 |
| 4WD Standard tires (ag) | Front: 13.6-24.8. Rear: 18.4-34 |
| 4WD Optional tires (ag) | Front: 12.4-28. Rear: 16.9-38 |
Engine Specifications of John Deere, 2950
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 6-cylinder |
| Coolant capacity | 20 qts [18.9 L] |
|---|---|
| Displacement | 359 ci [5.9 L] |
| Compression | 17.4:1 |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Air cleaner | Two paper elements |
Transmission Information of John Deere, 2950Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in two ranges, plus reverse range with left-hand high-low power shift. Synchronized shifting between gears in a given range. |
| Transmission | John Deere Hi-Lo TSS |
|---|---|
| Type | Partial power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 2
| Adds a creeper to the low and reverse ranges of the Top-Shaft Synchronized transmission. |
| Transmission | John Deere TSS Creeper |
|---|---|
| Type | Partially synchronized |
| Gears | 12 forward and 8 reverse |
| 16-speed partial power shift |
| 12-speed partially synchronized |
Mechanical Specs of John Deere, 2950Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. Canopy available. Sound-Gard cab optional with available heat and air-conditioning. |
| Differential hydraulic wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of John Deere, 2950Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of John Deere, 2950
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Rear valves | 2 |
| Pump flow | 23 gpm [87.1 lpm] |
Three-Point Hitch of John Deere, 2950
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Load and depth control |
| Rear lift | 4868 lbs [2208 kg] |
Electrical System of John Deere, 2950
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 55 |
| Charging system | Alternator |
| ROPS Charging amps | 33 |
Frequently asked questions
How much horsepower does the John Deere 2950 have?
The John Deere 2950 delivers 94 hp[P] HP.
What years was the John Deere 2950 produced?
The John Deere 2950 was produced in 1983-1988.
What engine does the John Deere 2950 have?
The John Deere 2950 is powered by a Diesel, 6-cylinder engine.
What transmission does the John Deere 2950 use?
The John Deere 2950 uses a John Deere Hi-Lo TSS transmission.
How much does the John Deere 2950 weigh?
The John Deere 2950 weighs 10100 lbs (4WD cab) [4581 kg].
Is the John Deere 2950 4WD?
The John Deere 2950 is available in 2WD/4WD.