John Deere 5093E tractor

John Deere 5093E

Power

93 hp

Production

2008-2012

Engine

Turbocharged diesel, 4-cylinder

Transmission

PowrReverser

Weight

7,385 lbs [3349 kg]

Drive

4WD

From the same series:

5083E
5101E

Introduction

Production Information of John Deere, 5093E

The production information of the tractor (5093E) includes details about its manufacturing.

Utility tractor
Built in Augusta, Georgia, USA
ManufacturerJohn Deere
Original price$44,848 (2011)

Dimension and Tires Information of John Deere, 5093E

This section sums up the dimension and tires information of the tractor.

Clearance (front axle)16.5 inches [41 cm]
Wheelbase85.8 inches [217 cm]
Height (cab)98.8 inches [250 cm]
Height (hood)54.3 inches [137 cm]
Length147.6 inches [374 cm]
Front axleFlange axle: 64.6 inch length [1640 mm]
Operating weight7,385 lbs [3349 kg]
Width64.6 inches (axle flange) [164 cm]
Flange axle rear axle57.5 inch length [1460 mm]
Ag front11.2-24
Industrial front12.5/80-18
Ag rear18.4-30
Ag rear16.9-30
Industrial rear19.5L-24
Ag front12.4-24

Engine Specifications of John Deere, 5093E

Get the specifications for the engine and if different options are available.

John Deere PowerTech 4045
Liquid-cooled
Turbocharged diesel
4-cylinder
Intake valve clearance0.014 inches [0.356 mm]
Starter volts12
Rated Power (gross)93 hp [69.4 kW]
Exhaust valve clearance0.018 inches [0.457 mm]
Air cleanerDry
Compression17.6:1
Fuel systemDirect injection
Displacement276 ci [4.5 L]
EmissionsTier 2
Bore/Stroke4.19x5.00 inches [106 x 127 mm]
Firing order1-3-4-2
Idle RPM825-2625
Rated RPM2400

Transmission Information of John Deere, 5093EY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four gears in each of three ranges with reverser lever. Forward/reverse power shift. Synchronized shift between gears with clutch. Shifts between ranges are unsynchronized.
TransmissionPowrReverser
ClutchWet disc
TypePartially synchronized
Gears12 forward and reverse

Mechanical Specs of John Deere, 5093EY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Independent hydraulic wet disc brakes
Cab standard with heat and air-conditioning.
SteeringHydrostatic power
Final drivesPlanetary
Differential lockRear standard

Power Information of John Deere, 5093EY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
540/1000 (optional)
ClutchMechanical
Rear PTO Type540/540E

Hydraulics Specifications of John Deere, 5093E

Hydraulic system type, pressure, pump flow and valves.

Steering flow6.6 gpm [25.0 lpm]
TypeOpen center
Pump flow15.9 gpm [60.2 lpm]
Mid valves2 (optional)
Pressure2828 psi [195.0 bar]
Steering press.1900 psi [131.0 bar]
Total flow22.5 gpm [85.2 lpm]
Rear valves1 to 3

Three-Point Hitch of John Deere, 5093E

Hitch category and rear/front lift capacity.

Rear Type2/1
ControlPosition control and top-link draft sensing
Rear lift (at 24"/610mm)3,213 lbs [1457 kg]

Electrical System of John Deere, 5093E

Battery voltage, charging system and ground.

GroundNegative
Battery CCA950
120 (optional)
Charging systemAlternator
Battery volts12
Charging amps90

Frequently asked questions

How much horsepower does the John Deere 5093E have?

The John Deere 5093E delivers 93 HP.

What years was the John Deere 5093E produced?

The John Deere 5093E was produced in 2008-2012.

What engine does the John Deere 5093E have?

The John Deere 5093E is powered by a Turbocharged diesel, 4-cylinder engine.

What transmission does the John Deere 5093E use?

The John Deere 5093E uses a PowrReverser transmission.

How much does the John Deere 5093E weigh?

The John Deere 5093E weighs 7,385 lbs [3349 kg].

Is the John Deere 5093E 4WD?

The John Deere 5093E is available in 4WD.

Compare the John Deere 5093E with another model