John Deere 6225
Power
94 hp
Production
unknown
Engine
Turbocharged intercooled diesel, 4-cylinder
Transmission
John Deere SyncroPlus
Weight
8,333 lbs [3779 kg]
Drive
2WD/4WD
From the same series:
Introduction
John Deere 6225 Utility Tractor
The John Deere 6225 is a utility tractor produced in Mannheim, Germany, designed to provide a balance of power and versatility for general agricultural operations. It belongs to the 6325 series and is built to support various field tasks through a robust mechanical configuration.
Engine and Performance
The tractor is powered by the John Deere 4045HL, a 4.5-liter, 4-cylinder turbocharged and intercooled diesel engine. It delivers a net rated power of 90 hp (67.1 kW) and a maximum net power of 95 hp (70.8 kW). The engine features electronic fuel injection and complies with Stage III emission standards, operating efficiently between 1500 and 2300 RPM.
Transmission and Drivetrain
The 6225 offers two transmission options: the 12-speed John Deere SyncroPlus synchronized transmission or the 16-speed John Deere PowrReverser with a power shuttle. Both utilize a 225mm wet disc PermaClutch II to ensure durability during frequent direction changes. The machine is available in 4x2 2WD or optional 4x4 MFWD 4WD configurations.
Hydraulics and Hitch
The hydraulic system utilizes an open-center gear pump providing a flow rate of 14.27 gpm (54.0 lpm) at a system pressure of 2538 psi (175.0 bar). The rear hitch is a Category 2/1 type, equipped with load and depth control using mechanical top-link sensing, capable of lifting up to 9,037 lbs (4099 kg).
Dimensions and PTO
The tractor features a wheelbase of 94.5 inches (240 cm) and an overall length of 168.2 inches (427 cm). It is equipped with an independent rear PTO offering 540/1000 rpm speeds, controlled by a mechanical-hydraulic wet disc clutch system.
Conclusion
The John Deere 6225 serves as a reliable utility platform suitable for mid-sized farming operations that require a balance of maneuverability, diverse transmission capabilities, and substantial lifting capacity.
Production Information of John Deere, 6225
- Utility tractor
- Built in Mannheim, Baden-Württemberg, Germany
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 6225
- Flange rear axle
| Clearance (rear axle) | 63.5,63.9,66.2,67.4,71.5,72.7,72.7,73.9,75.4 inches [161 cm] |
|---|---|
| Wheelbase | 94.5 inches [240 cm] |
| Shipping weight | 8,333 lbs [3779 kg] |
| Height (ROPS) | 108.9 inches [276 cm] |
| Length | 168.2 inches [427 cm] |
| Max weight | 15,430 lbs [6999 kg] |
| Width | 87.2 inches [221 cm] |
| Standard tires (ag) | Front: 7.50R18. Rear: 18.4R30 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 13.6R24. Rear: 18.4R30 (4WD) |
Engine Specifications of John Deere, 6225
- John Deere 4045HL
- Liquid-cooled
- Turbocharged intercooled diesel
- 4-cylinder
| Operating RPM | 1500-2300 |
|---|---|
| Oil capacity | 16.9 qts [16.0 L] |
| Idle RPM | 850-2460 |
| Starter | Electric |
| Rated Power (net) | 90 hp [67.1 kW] |
| Torque | 300 lb-ft [406.8 Nm] |
| Starter volts | 12 |
| Maximum Power (net) | 95 hp [70.8 kW] |
| Rated Power (gross) | 94 hp [70.1 kW] |
| Maximum Power (gross) | 99 hp [73.8 kW] |
| Coolant capacity | 28 qts [26.5 L] |
| Displacement | 276 ci [4.5 L] |
| Emissions | Stage III |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Rated RPM | 2300 |
| Torque RPM | 1600 |
| Firing order | 1-3-4-2 |
| Cooling system | Viscous fan |
| Fuel system | Electronic fuel injection |
Transmission Information of John Deere, 6225
Transmission variants 1
- Three gears (1-3) plus reverse (R) in four ranges (A-D).
| Transmission | John Deere SyncroPlus |
|---|---|
| Oil capacity | 58.1 qts [55.0 L] |
| Clutch | Wet 225mm disc PermaClutch II |
| Type | Synchronized |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
- Four gears (1-4) in four ranges (A-D) with left-hand reverser lever. 30 KPH and 40 KPH maximum speed options available.
| Transmission | John Deere PowrReverser |
|---|---|
| Oil capacity | 58.1 qts [55.0 L] |
| Clutch | Wet 225mm disc PermaClutch II |
| Type | Power shuttle |
| Gears | 16 forward and reverse |
- 12-speed synchronized
- 16-speed power shuttle
Mechanical Specs of John Deere, 6225
- Two-post foldable ROPS.
- Hydraulic wet disc brakes
| Drive | 4x2 2WD |
|---|---|
| Drive(optional) | 4x4 MFWD 4WD (optional) |
| Steering | Hydrostatic power |
Power Information of John Deere, 6225
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 1000@2208 |
| Engine RPM | 540@2143 |
| Clutch | Mechanical-hydraulic wet disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of John Deere, 6225
| Type | Open center gear pump |
|---|---|
| Pressure | 2538 psi [175.0 bar] |
| Pump flow | 14.27 gpm [54.0 lpm] |
Three-Point Hitch of John Deere, 6225
| Rear Type | 2/1 |
|---|---|
| Control | Load and depth control with mechanical top-link sensing |
| Rear lift | 9,037 lbs [4099 kg] |
Electrical System of John Deere, 6225
| Ground | Negative |
|---|---|
| Battery AH | 110 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 90 |
Where it sits
With 94 HP, the John Deere 6225 sits just below 6325 (105 HP) in John Deere's range.
Frequently asked questions
How much horsepower does the John Deere 6225 have?
The John Deere 6225 delivers 94 HP.
What years was the John Deere 6225 produced?
The John Deere 6225 was produced in unknown.
What engine does the John Deere 6225 have?
The John Deere 6225 is powered by a Turbocharged intercooled diesel, 4-cylinder engine.
What transmission does the John Deere 6225 use?
The John Deere 6225 uses a John Deere SyncroPlus transmission.
How much does the John Deere 6225 weigh?
The John Deere 6225 weighs 8,333 lbs [3779 kg].
Is the John Deere 6225 4WD?
The John Deere 6225 is available in 2WD/4WD.