John Deere 4010
Power
18 hp
Production
2002-2005
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1420 lbs [644 kg]
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 4010
The production information of the tractor (4010) includes details about its manufacturing.
| Built in Japan |
| Compact Utility tractor |
| Distributor | John Deere |
|---|---|
| Manufacturer | Yanmar |
Dimension and Tires Information of John Deere, 4010
This section sums up the dimension and tires information of the tractor.
| Weight | 1420 lbs [644 kg] |
|---|---|
| Wheelbase | 57.1 inches [145 cm] |
| Height (hood) | 44 inches [111 cm] |
| 44.5 inches*Maximum [113 cm] | |
| Length | 102 inches [259 cm] |
| Max Drawbar | 562 lbs [254 kg] |
| Height (ROPS) | 78.4 inches [199 cm] |
| Width | 40.6 inches*Minimum [103 cm] |
| Clearance (front axle) | 9.8 inches [24 cm] |
| Ag front | 6-12 |
|---|---|
| Industrial front | 5.70-12 |
| Lawn/turf rear | 29x12.50-15 |
| Ag rear | 8-16 |
| Industrial rear | 10-16.5 |
| Lawn/turf front | 22x9.00-12 |
Engine Specifications of John Deere, 4010
Get the specifications for the engine and if different options are available.
| Yanmar 3TNE68 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Coolant capacity | 2.5 qts [2.4 L] |
|---|---|
| Power (gross) | 18.5 hp [13.8 kW] |
| Fuel system | Indirect injection |
| Rated RPM | 3000 |
| Air cleaner | Dry |
| Displacement | 47.84 ci [0.8 L] |
| Power (net) | 18 hp [13.4 kW] |
| Bore/Stroke | 2.68x2.83 inches [68 x 72 mm] |
| Oil capacity | 2.1 qts [2.0 L] |
| Starter volts | 12 |
| Operating RPM | 1300-3225 |
Transmission Information of John Deere, 4010Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 10.4 qts [9.8 L] |
Mechanical Specs of John Deere, 4010Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Two-post ROPS. |
| Steering | Hydrostatic power |
|---|---|
| Final drives | Spur gear |
| Differential lock | Mechanical rear |
Power Information of John Deere, 4010Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| Mid PTO Type | 2100 |
Hydraulics Specifications of John Deere, 4010
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 2.6 gal [9.8 L] |
Three-Point Hitch of John Deere, 4010
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 860 lbs [390 kg] |
Electrical System of John Deere, 4010
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 435 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere 4010 have?
The John Deere 4010 delivers 18 HP.
What years was the John Deere 4010 produced?
The John Deere 4010 was produced in 2002-2005.
What engine does the John Deere 4010 have?
The John Deere 4010 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 4010 use?
The John Deere 4010 uses a Hydrostatic transmission.
How much does the John Deere 4010 weigh?
The John Deere 4010 weighs 1420 lbs [644 kg].
Is the John Deere 4010 4WD?
The John Deere 4010 is available in 4WD.