John Deere 4110
Power
20 hp
Production
2002-2006
Engine
3-cylinder
Transmission
Unsynchronized gear
Weight
1579 lbs [716 kg]
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 4110
The production information of the tractor (4110) includes details about its manufacturing.
| Built in Japan |
| Compact Utility tractor |
| Distributor | John Deere |
|---|---|
| Manufacturer | Yanmar |
Dimension and Tires Information of John Deere, 4110
This section sums up the dimension and tires information of the tractor.
| Hydro Operating weight | 1579 lbs [716 kg] |
|---|---|
| Wheelbase | 58 inches [147 cm] |
| Height (ROPS) | 78.9 inches [200 cm] |
| Height (hood) | 44 inches [111 cm] |
| Length | 103 inches [261 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Gear Operating weight | 1517 lbs [688 kg] |
| Width | 47 inches [119 cm] |
| Ag front | 5.00-12 |
|---|---|
| Industrial rear | 12-16.5 |
| Lawn/turf rear | 315/75D-15 |
| Ag rear | 9.5-16 |
| Lawn/turf front | 23x8.50-12 |
Engine Specifications of John Deere, 4110
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 61.4 ci [1.0 L] |
| Oil capacity | 2.3 qts [2.2 L] |
| Power (gross) | 20 hp [14.9 kW] |
| Bore/Stroke | 2.91x3.07 inches [74 x 78 mm] |
| Coolant capacity | 2.5 qts [2.4 L] |
| Rated RPM | 2650 |
| Air cleaner | Dry |
| Power (net) | 19 hp [14.2 kW] |
Transmission Information of John Deere, 4110Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Unsynchronized four-speed transmission with high, low, and reverse ranges. Tractor must be stopped, and clutch used, to shift ranges and gears. |
| Type | Unsynchronized gear |
|---|---|
| 122o↔0oF [50o↔-17oC] | : HY-GARD |
| Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD |
| Gears | 8 forward and 4 reverse |
| 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
| Oil capacity | 14.4 qts [13.6 L] |
Transmission variants 2
| The 4110 has an optional two-range hydrostatic transmission controlled by forward and reverse foot pedals. The tractor must be stopped to shift between high and low ranges. |
| Type | Hydrostatic |
|---|---|
| 122o↔0oF [50o↔-17oC] | : HY-GARD |
| Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD |
| Gears | Infinite forward and reverse (2-range) |
| 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
| Oil capacity | 14 qts [13.2 L] |
| 8-speed unsynchronized gear |
| Hydrostatic |
Mechanical Specs of John Deere, 4110Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Steering | Power |
|---|---|
| Final drives | Spur gear |
| Differential lock | Mechanical rear |
Power Information of John Deere, 4110Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Gear Rear PTO | Transmission |
|---|---|
| Mid PTO Type | 2100 |
| Mid PTO | Indpendent |
| Hydro Rear PTO | Independent |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 4110
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.1 gpm [19.3 lpm] |
| Capacity | 3.6 gal [13.6 L] |
| Valves | 5 |
Three-Point Hitch of John Deere, 4110
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1150 lbs [521 kg] |
Electrical System of John Deere, 4110
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 435 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere 4110 have?
The John Deere 4110 delivers 20 HP.
What years was the John Deere 4110 produced?
The John Deere 4110 was produced in 2002-2006.
What engine does the John Deere 4110 have?
The John Deere 4110 is powered by a 3-cylinder engine.
What transmission does the John Deere 4110 use?
The John Deere 4110 uses a Unsynchronized gear transmission.
How much does the John Deere 4110 weigh?
The John Deere 4110 weighs 1579 lbs [716 kg].
Is the John Deere 4110 4WD?
The John Deere 4110 is available in 4WD.