Introduction
Production Information of John Deere, 435
The production information of the tractor (435) includes details about its manufacturing.
| The 435 was the first John Deere tractor released after the new PTO standards were adopted in 1958. It was also the first Deere tractor to have its horsepower rated in terms of PTO after Nebraska dropped the belt test in 1959. |
| Utility tractor |
| Original price was $3,000 in 1960 |
| Manufacturer | John Deere |
|---|---|
| Total built | 4,626 |
| Monterrey, Mexico | |
| Factories | Dubuque, Iowa, USA |
Dimension and Tires Information of John Deere, 435
This section sums up the dimension and tires information of the tractor.
| Front tread | 48 to 80 inches [121 to 203 cm] |
|---|---|
| Wheelbase | 85 inches [215 cm] |
| Shipping weight | 3200 lbs [1451 kg] |
| Height | 71.5 inches [181 cm] |
| Length | 136.125 inches [345 cm] |
| Front tread | 56 to 88 inches [142 to 223 cm] |
| Ground clearance | 21 inches [53 cm] |
| Width | 85.75 inches [217 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm (PAVT)] |
| Rear tread | 48 to 98 inches [121 to 248 cm] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 12-28 |
| Ag rear | 10-34 |
| Ag front | 6.00-16 |
Engine Specifications of John Deere, 435
Get the specifications for the engine and if different options are available.
| 2-cycle engine |
| Liquid-cooled |
| 2-cylinder |
| Starter volts | 12 |
|---|---|
| Oil capacity | 9 qts [8.5 L] |
| Air cleaner | Oil bath |
| Displacement | 106.1 ci [1.7 L] |
| Coolant capacity | 10 qts [9.5 L] |
| Rated RPM | 1850 |
| Compression | 17:1 |
| Bore/Stroke | 3.875x4.50 inches [98 x 114 mm] |
Transmission Information of John Deere, 435Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| SAE 80 | |
| Oil type | SAE 80 |
| Gears | 4 forward and 1 reverse |
| Oil capacity | 9.5 qts [9.0 L] |
Transmission variants 2
| Type | Gear |
|---|---|
| SAE 80 | |
| Oil type | SAE 80 |
| Gears | 5 forward and 1 reverse |
| Oil capacity | 9.5 qts [9.0 L] |
| 4-speed gear |
| 5-speed gear |
Mechanical Specs of John Deere, 435Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical dry disc brakes |
| Steering | Manual |
|---|---|
| Power optional after 1960 (SN 436452) |
Power Information of John Deere, 435Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmision |
|---|---|
| 540/1000 (1.375) | |
| Live *Optional with 5-speed transmission. | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 435
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|
Three-Point Hitch of John Deere, 435
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Frequently asked questions
How much horsepower does the John Deere 435 have?
The John Deere 435 delivers 36 hp[P] HP.
What years was the John Deere 435 produced?
The John Deere 435 was produced in 1959-1960.
What engine does the John Deere 435 have?
The John Deere 435 is powered by a 2-cylinder engine.
What transmission does the John Deere 435 use?
The John Deere 435 uses a Gear transmission.
How much does the John Deere 435 weigh?
The John Deere 435 weighs 3200 lbs [1451 kg].
Is the John Deere 435 4WD?
The John Deere 435 is available in 2WD.